Connecting A Wireless Client Via Wps - THOMSON TG185n Setup And User Manual

3 The THOMSON TG185n as Wireless Access Point
3.2

Connecting a Wireless Client via WPS

WPS
Wi-Fi Protected Setup (WPS) allows you to add new wireless clients to your network in a swift and easy way,
without the need to enter all of your wireless settings (SSID, encryption,...).
Requirements
Your wireless clients must supports WPS. Check the documentation of your wireless client for this.
WPS must be enabled on your THOMSON TG185n.
You can only use WPS with the following security levels:
WPA-PSK
WPA2-PSK
No encryption
Enabling WPS on your THOMSON TG185n
If WPS is not yet enabled on your THOMSON TG185n:
1 Open your web browser and browse to http://192.168.1.11.
2 On the Basic Setting menu, click Wireless Setting.
3 The Wireless Setting page appears.
4 Select the Enable WPS check box.
5 Click Apply.
Supported WPS options
The THOMSON TG185n supports the following options:
Push Button Configuration (PBC):
This is the easiest way to connect your wireless client. You have to push a button both on the THOMSON
TG185n and the wireless client. For more information, see
PIN code entry on the wireless client:
The THOMSON TG185n generates a PIN code that you have to enter in the configuration utility of your
wireless client. For more information, see
PIN code entry on the THOMSON TG185n:
The wireless client generates a PIN code that you have to enter on the web interface of your THOMSON
TG185n. For more information, see
Your wireless client may not support all of these options. For more information, consult the
documentation of your wireless client.
Troubleshooting
If you are having trouble connecting your wireless client via WPS, try to configure it manually. For more
information, see "3.3 Manually Configuring a Wireless Client" on page
E-DOC-CTC-20080624-0009 v0.2
"3.2.1 Push Button Configuration" on page
"3.2.2 PIN Code Entry On The Wireless Client" on page
"3.2.3 PIN Code Entry On the THOMSON TG185n" on page
15.
12.
13.
14.
11