Setting The Rear Output (Frt+Rear) - Pioneer KEH-P6011R Operation Manual

Initial Setting

Setting the Rear Output (FRT+REAR)

This product's rear output (rear speaker leads output and RCA Rear output) can be used
for full-range speaker ("FRT+REAR") or Subwoofer ("FRT+S/W") connection. If you
switch Rear Output setting to the "FRT+S/W", you can connect a rear speaker lead directly
to a Subwoofer without using an auxiliary amp.
Initially, the unit is set for rear full-range speaker connection ("FRT+REAR").
Note:
• Even if you change this setting, there is no output unless you switch the Subwoofer Output (refer to
page 41) in the Audio Menu ON.
• Both rear speaker leads output and RCA Rear output are switched simultaneously in this setting
mode.
1. Press the FUNCTION button and select the Rear Output setting mode
(FRT+REAR) in the Initial Setting Menu.
2. Change the Rear Output set-
ting with the 5/∞ buttons.
Note:
• When no Subwoofer is connected to the rear output, select "FRT+REAR".
• When a Subwoofer is connected to the rear output, set for Subwoofer "FRT+S/W".
47