• A note for the plumber… • When planning the pipes, plumbing fixtures and waste lines, review the Metpar layout drawings carefully to determine the position and location of the shower cabinets. Verify where the shower heads will be installed.
• Something else to consider… All SH700 shower cabinets are 82” high. If a handicap shower cabinet is recessed into the floor, then the top will no longer align with top of another shower cabinet next to it. Furthermore, if there are dressing compartments in front of the shower cabinets, or if there are toilet partitions next to them, the headrail from these units will not align with the top of the handicap shower cabinet.
Take the other threshold and slide it up between the two small front pilasters so it fits into the void under the cap. Secure this piece with screws through the holes in the top cap. SH700 Installation.docx Page 5 of 6 7/6/2017...
Metpar representative from which you purchased the materials. They are best suited to assist you. Another quick and easy source of information is the Metpar web site at Metpar.com. Here you will find a wealth of information, details, specifications, technical support and so much more. Or, you can also contact us by email, phone or fax.
Need help?
Do you have a question about the SH700 and is the answer not in the manual?
Questions and answers