Time 4 sleep QB-8572 Assembly Instructions

Important Information
Please note the recommended process for adjusting centre legs when assembling
your bed.
Before placing the mattress on the base, please ensure that the SUPPORT LEGS
ARE NOT QUITE TOUCHING THE FLOOR BY AROUND 10MM . When the bed
is then in use the support legs will sit firmly on the solid surface.
PLEASE ENSURE THAT THE LEGS ARE VERTICAL.
When moving the bed it is essential that it is LIFTED into the new
position. NEVER DRAG the bed as this will move the legs from the vertical
position thus weakening the support of the centre rail.
Adhering to the recommended process will ensure that your bed gives you years
of trouble free service.