Advertisement
Advertisement
Table of Contents
Summary of Contents for fox fury RUGO
- Page 1 RUGO ™ 700-300 PRODUCT MANUAL...
- Page 2 ™ FULL ASSEMBL Y INTRODUCTION Reference Guide Overview Physical Characteristics ¼"-20 MOUNT POWER PACK GUARDS Charging the Power Pack POWER/MODE SWITCH Reassembling the Rugo after Charging ™ TRI-LENS ™ Power Pack Life Operational Modes CHARGE INDICATOR TRI-LENS THUMBSCREWS ™ Using the Tri-Lens ™...
-
Page 3: Charging The Power Pack
IMPORTANT! Please fully charge the Power Pack before using the Rugo for the first time. ™ PHYSICAL CHARACTERISTICS Please read below before using your Rugo™ as it relays beneficial operating and safety information. RUGO ™ DIMENSIONS 2.9” x 1.0” x 2.0” (74 x 25 x 50mm) 5.6 oz (158g) with Power Pack and Light Head... - Page 4 USING THE TRI-LENS REASSEMBLING THE RUGO AFTER CHARGING ™ ™ Install the Power Pack to the Light Head—confirm position of alignment posts to their respected cavities. The Rugo Tri-Lens has three (3) beam emission angles which can be used for ™...
- Page 5 ACTION CAM The Rugo can be mounted to an Action Cam via the removable Standard ™ Mount. Line up the mounts on the Rugo with the mounts on the Action Cam ™ and then tighten the Mount Knobs. NOTE: Orientation of Knobs should match as shown below.
-
Page 6: Maintenance
Once screws are loose, remove them and then lift up on the Guard to remove it. Repeat steps 1–2 to remove the Guard on the opposite side of the Rugo ™ FOR RE-INSTALLATION, make sure to tighten the screws until they are snug. -
Page 7: Warranty And Other Information
Asia or the USA, 4. Any modifications to light, cable or substantial compliance with FoxFury’s under strict quality control. Rugo ¼"-20 and Cold Shoe Mount battery pack automatically voids all written specifications for this product P/N N50-133 warranties on this product. - Page 8 FOXFURY .COM 6/2017...
Need help?
Do you have a question about the RUGO and is the answer not in the manual?
Questions and answers