Summary of Contents for bannerman BW2015-M
- Page 1 Bannerman Line Trimmer BW2015-M Operation & Parts Manual Read the following instructions before use.
- Page 2 To give you many years of service, regular preventative maintenance is required. Should you require further assistance, please feel free to contact your local Bannerman dealer, or Bannerman directly Bannerman Ltd.
-
Page 3: Warranty Statement
Warranty Card has been filled out and submitted to Bannerman Ltd. Warranty Cards are included in the package with this booklet, and are also able to be filled in and printed off of our website: www. - Page 4 Safety Warnings and Definitions Understanding signal words and follow safety instructions Safety Alert Symbol – This is the safety alert symbol. When you see this symbol in this manual, be alert and avoid personal injury. When accompanied by the words “CAUTION” and “WARNING”, it calls your attention to items or operations which can lead to a serious injury.
-
Page 5: Safety Rules
Safety Rules Read the operator’s manual carefully. Be familiar with the controls and the proper use of the unit, and how to turn off, and unhook the harness quickly in an emergency. WARNING: To avoid serious injury There is a great risk to eyes from thrown objects. Always wear proper eye protection. - Page 6 Precautions WARNING: To avoid serious injury NEVER allow children to operate or play with the machine. NEVER allow anyone to use this machine without proper instruction. WARNING: To avoid serious injury Keep people out of the danger zone. This is a circle of 15 meter radius around the unit and operator.
- Page 7 Strictly NO FIRE WARNING: To avoid serious injury ALWAYS HANDLE GASOLINE WITH CARE. IT IS HIGHLY FLAMMABLE. Always stop the engine to refuel. DO NOT refuel a hot engine. Wait until the engine has cooled down. DO NOT remove the fuel cap when the engine is still warm or running.
-
Page 8: Checks Before Starting
Checks before Starting Adjust the handle to a position for comfort and keeping a good balance is recommended. Make sure that the unit is assembled properly. If using the shoulder strap that is provided with this unit, balance the unit as recommended by adjusting the position of the clamp on the shaft. -
Page 9: Cautions During Operation
Cautions during Operation NOTE: If necessary to cut where people or cards could be hit by thrown, cut at a reduced (slow) throttle speed to reduce the speed of the cutting head. WARNING: To avoid serious injury Shut down immediately if the unit starts to shake or vibrate. This could be a sign of danger from a broken part or missing fasteners. - Page 10 WARNING: To avoid serious injury BLADE THRUST may when the spinning blade contacts a solid object in the critical area. A dangerous reaction may occur causing the entire unit and operator to be thrust violently. This reaction is called BLADE THRUST. As a result, the operator may lose control of the unit which may cause serious or fatal injury.
-
Page 11: Technical Data
Names and Specifications for each part Technical Data Drive System: Auto Centrifugal clutch spiral bevel gear Reduction Ratio: 14:19 Rated cutter edge rotation speed (rpm): 4,300 to 6,500 Direction of blade rotation: Left (Top View) Throttle Lever: Fixed Type Vibration Dampener: Genuine Vibration Dampener MITSUBISHI TLE-27 Engine Type... - Page 12 CAUTION: Instructions which, if not followed, could result in mechanical damage or failure. NOTE: the FUEL MIXTURE for the MITSUBISHI engine is 50:1 Only use premium two-stroke engine oil that is formulated for modern, high performance, air- cooled two-stroke engines. Oil Specification JASO Service Classification – FC Class. DO NOT use BIA or TCW2 cycle water cooled engine oils (this oil is for engines that operate at 600 degrees Fahrenheit, The MITSUBISHI TLE-27 engine operates at up to 900 degrees Fahrenheit).
-
Page 13: Installations
Installations Installing the Engine - Fasten the engine together with the fuel tank facing down. Be sure to fasten the engine mounting bolts uniformly and secure. Installing the throttle lever and connecting the throttle cable - Insert the throttle cable through the cable passage in the main grip. -
Page 14: Starting And Stopping The Engine
Installing the blade (Optional Equipment) - Install the parts in the following order: Holder A – Blade Holder B. Make sure that the blade’s direction of rotation is orientated properly before installing the blade. Use an “L” wrench to prevent Holder A from spinning and tighten the blade fastening nut. - Page 15 Working Methods Nylon Cutter Pull out the cord of the nylon cutter by 12 to 15 cm. WARNING: To avoid serious injury Use only nylon line. DO NOT use any type of blade for edging or scalping. Always check that there is a safe distance between the cutting device and your feet.
- Page 16 NOTE: to ensure safety, be sure not to cut wood and twigs with the BW-BB Brush Blade – 4 Tooth Blade. WARNING: To avoid serious injury For the sake of safety the blade used shall be one designed by this manufacturer. Since rotary blades rotate in the left direction (as seen from the top), it is more efficient to mow grass from right to left.
-
Page 17: Inspection And Maintenance
Setting of the Rotary Blade Root of a blade shall be rounded by a round file. Inspection and Maintenance Inspect and maintain satisfactory for achieving a longer life of the equipment and nice safe work. After work is finished, remove Holder A, and take off the scraps and grass inside it and wipe it off cleanly. -
Page 18: Inspection Table
Inspection Table Inspection and Maintenance Period Items for Inspection and Before After Every 25 Every 100 Maintenance Work Work Hours hours Inspection of cutters Inspection of clamping bolts of gear case Inspection of safety guard Inspection of bolts Inspection of main pipe Cleaning of gear case Supply of gear case grease Cleaning of clutch drum... -
Page 19: Throttle Cables
BW-2010 Gear Case & Driving Apparatus Reference Part No. Description Qty. N71008-320 Gear Case Assembly N17730-189 Maine Pipe N64011-250 Main Shaft N71012-145 Hanger Band Assembly N36001-110 Main Grip N68013-136 Spring N71010-263 Clutch Case Assembly N0416N0620 Socket Screw (6mm X 20mm W/SW/PW) N51104-143 Guide... - Page 20 BW-2015-M Handle & Fitting Reference Part No. Description Qty. N71011-153 Handle Joint Assembly N51009-143 Handle Joint A N51010-146 Handle Joint B N51013-122 Handle Joint C N0412N0615 Socket Screw (6mm X 25mm) N61023-192 Sleeve N71038-171 Guard Band Set N0412N0515 Socket Screw (6mm X 15mm) N11029-107 Guard Band N36046-164...
Need help?
Do you have a question about the BW2015-M and is the answer not in the manual?
Questions and answers