Sensual Spa's Pure Range Installation And Operating Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

INSTALLATION AND OPERATING MANUAL

Pure Range

INSTALLERS PLEASE NOTE, THESE

INSTRUCTIONS ARE TO BE LEFT WITH

THE CUSTOMER

Technical Support: 0871 526 5926

Warranty Claims Or Delivery Damage: www.sensualspas.co.uk

Table of Contents

Need help?

Do you have a question about the Pure Range and is the answer not in the manual?

Questions and answers

Summary of Contents for Sensual Spa's Pure Range

Page 1 INSTALLATION AND OPERATING MANUAL Pure Range INSTALLERS PLEASE NOTE, THESE INSTRUCTIONS ARE TO BE LEFT WITH THE CUSTOMER Technical Support: 0871 526 5926 Warranty Claims Or Delivery Damage: www.sensualspas.co.uk...
Page 3 Thank you for purchasing this product. To guarantee the product delivers a long service life, please ensure it is fi tted and used in accordance with the instructions contained in this booklet. Please check that the boxes contain all the items listed below, and report to us any parts that are missing or damaged prior to assembly and within 48 hours of receipt.
Page 4 Hydro Shower Contents Below is a list of the parts you should have received for the installation of your shower. Please note that several parts may be pre-fi tted in place, such as the monsoon shower head, etc. Please note, the design and shape of parts may change occasionally but will always off er the same or greater functionality.
Page 5 Tray/Base with Waste assembly and fl exible waste pipe pre-fi tted (shape and size vary according to model). Two Curved polished Aluminium frame sections. Thermostatic shower valve Chrome monsoon arm, Monsoon head, swivel joint and two nuts for fixing. Glass shelf and fi ttings. Two longer and two slightly shorter Flapped seals and a pair of Magnetic door seals.
Page 6: Important Notice
IMPORTANT NOTICE Before you proceed with fi tting your Sensual Spa Shower please read and understand the following: By commencing testing and installation of the unit you are agreeing to the Terms and Conditions set out by us: copies of which are available by contacting us by by email or by telephone (details on the cover of this manual).
Page 7: Before You Begin
Before you begin Assembly requires two persons. Tools needed to assemble this shower cabin: Electric screwdriver with a selection of heads, regular screwdrivers, pipe grips, spanners, spirit level, sharp knife and rubber mallet. Connection of the electrical supply and plumbing may require additional tools. Do not fully tighten any screw fixings initially during build as this allows the frame to move a little and aid location of all holes and screws;...
Page 8 Assembly Do not fi t the shower into locations where you do not have at least 40cm access all around the cabin both for installation and for future service access. We advise you do not fi t sinks, toilets etc that restrict access behind the shower.
Page 9 FITTING SEAT (OPTIONAL) If your product came with a seat you may choose to install this item. Before commencing full assembly of the product you will need to prepare and fi t the seat. You need to drill three holes for the fi xing bolts into the tower at your preferred height.
Page 10 LEVELING AND FITTING THE TRAY Remove the protective fi lm covering the base. Connect the soil pipe, trap and any couplings to the fl exible waste under the tub. You may choose to fi t either a HEPV0 trap with the appropriate couplings or choose to fi t a McAlpine ST28M coupling to a McAlpine 28-NRV trap.
Page 11: Front Frame
FRONT FRAME Locate the two silver coloured upright frame sections and the two curved frame rail sections. You will need the 8 x LONG screws to join these sections together. The upper rail is deeper height than the lower rail. Align the upright with two holes in, to the upper curved rail.
Page 12 INSTALLING THE FIXED SIDE GLASS PANELS Remove the SEAL TRIM that is located in the inside edge of the lower curved rail. It is held in position by two screws. Remove this trim to help you fi t the fi xed side glass panels. You will need to re-attach it after the glass is fi tted.
Page 13: Rear Panel Assembly
GLASS RETAINING CLIPS Now both glass panels are fully inserted into the uprights you can tighten up the four corners of the silver framework which will not hold the glass in position. Next you need to fi t the Retaining Clips to hold the glass fi rmly.
Page 14 TIP: Only fi t each screw loosely at fi rst to allow enough movement to locate every screw hole. Once all screws are located in place, then tighten each screw up fully. Carefully lift the three joined sections onto the tray into position.
Page 15 FITTING THE FRONT FRAME Place the completed front frame section onto the front of the shower tray and align the uprights with the rear glass panels so that the fi xing holes line up. From behind the side panel front edge locate a screw hole into the front frame screw through the lip of the white framework of the rear glass panels into the frame to secure in place.
Page 16 Before You Fit The Doors You May Wish To See The "SEALING THE SHOWER" Section Of These Instructions And Apply Sealant Around The Base Of The Tray Prior To Fitting The Doors FITTING THE SHOWER DOOR WHEEL RUNNERS Locate the pack of 8 twin wheel shower door runners (cams). There are two diff erent types provided.
Page 17 (image based on top cam fi tting) To fi t each of the cams, fi rst select the appropriate cam for the position on the door: 4 x Push button/Quick release for the lower position on the doors. 4 x Standard non push button for the upper position on doors. Position the Cam Body on the outside facing side of the door (curve pointing outwards).
Page 18: Fitting The Door Handles
FITTING THE DOOR HANDLES Each of the two shower doors requires a pair of chrome fi nished door handles to be fi tted. Each handle is comprised of several parts. Position the main handle part on the outside of a door ensuring the Chrome Washer and a Clear Washer are positioned also on the outside face over the thread.
Page 19 HAND SHOWER AND RISER You are now ready to assemble and connect the hand shower. The hand shower comprises of: Multi function hand shower Chrome fi nished riser bar Hand shower holster Chrome water hose Rear retaining nut Fitting screw The lower part of the riser bar has a threaded water connection.
Page 20 GLASS SHELF Assemble the shelf fully before fi tting into the shower. Position the lower chrome rail over the holes in the glass on the underside of the shelf with the silver grommets positioned between the two. On the upper side of the glass, pass the bolt through a washer and through the hole in the glass and fasten into the end of the lower rail.
Page 21: Shower Valve
SHOWER VALVE The shower valve can be accessed from the rear of the shower and is located on the central tower. The valve is divided into three parts that are joined together. The uppermost part is the divertor. There are three connections able to be made here.
Page 22 SHOWER SEALS This shower comes with 4 fl apped shower seals that are in two diff erent lengths. SHORT FLAPPED The shorter fl apped seals fi t onto the end of the fi xed glass panels. LONG FLAPPED The longer fl apped seals fi t onto the trailing edges of the doors.
Page 23: Water Connections
Water Connections This product requires a hot and cold water supply. Your Hot and Cold water supply pipes should ideally be fi nished about 1 meter above the fl oor centrally in the corner and fi nished with 15mm compression isolating valvea.
Page 24 Sealing the Shower We recommend that you seal the shower internally with a good quality bathroom sealant to provide an extra level of water proofi ng. After allowing the sealant to set (as per the sealant directions), water test the shower and check for signs of water leaking, please attend to them as required.
Page 25: Final Testing
Final Testing Check and test that each outlet function (hand shower, body jets and monsoon) work as expected by rotating the DIVERTOR DIAL (top chrome dial). Check the ON/OFF dial enables the water to be fully on or off in the position indicated on the valve markings.
Page 26: Valve Operation
Valve Operation There are 3 control dials inside your Shower Cabin. These dials control the output functions, water fl ow and temperature of your shower. The top dial can be turned to allow you to choose which output you wish to use: Body Jets, Overhead (Monsoon) Shower and Hand Shower.
Page 27 Cleaning and third party product use This shower should be cleaned after every use to remove the build up of dirt and bacteria. We would recommend that after normal showering use, that the cabin doors are left open until the inside is fully dry.
Page 28 Thermostatic Cartridge Your shower is fi tted with a Thermostatic Cartridge. Should you need to remove or replace the cartridge for maintenance or replacement, follow the instructions below. Q: I am having to turn the dial round as far as it will go to the hottest setting and the water is only just warm.
Page 29 With the Chrome dial removed you will see a plastic ring covering with the Thermostat underneath. Note down the position the ring is placed in. Pull the plastic ring (Temperature safety lock) towards you to remove. Keep this part safe You will now see the head of the Thermostat clearly visible.
Page 30: For Technical Assistance
FOR TECHNICAL ASSISTANCE PLEASE CALL 0871 526 5926...
Page 31 Shower Completion Form This form must be filled out by the plumber/installer and electrician (where applicable) in order to validate the warranty. You are required to register the warranty online at www.sensualspas.co.uk PLEASE RETAIN THIS CERTIFICATE FOR FUTURE REFERENCE Shower Details Model No.