Playback Controls Your remote control offers standard capabilities, as well as enhanced remote control buttons that function similarly to DVD controls. Here’s what each button does: List Select to see a list of recorded programs. Press the LIST button a second time to see what is scheduled to be recorded.
Page 4
PROGRAM YOUR REMOTE CONTROL This remote control is already pre-programmed to control your Set Top Box (STB). The instructions below will program this remote to control your TV. 1. Manually turn ON the TV that you want to setup on the remote 2.
DVD/VCR Audio DIGIT BRAND DIGIT BRAND DIGIT BRAND Insignia Insignia Bose Denon Panasonic Panasonic Philips/Magnavox Philips, Magnavox Onkyo Samsung Panasonic Sanyo Samsung Philips Sharp Sharp Pioneer Sony Sony Samsung Vizio Toshiba Sony Westinghouse VIZIO Yamaha *If you model of device is not on this list, please call _______________________ for a list of additional device codes.
PROGRAMMING DEVICE CONTROL The Potenza ST Universal Remote Control is preprogrammed to operate the set-top box provided by your television service provider, an RCA TV, a Toshiba DVD player, an RCA VCR, and a Pioneer audio receiver. To control devices other than the default brands, perform the following steps;...
SEARCHING FOR YOUR CODE If your home entertainment device does not respond to the Potenza ST Universal Remote Control after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, to search for a code for your TV: 1.
PROGRAMMING MASTER POWER KEY The Potenza ST Remote Control has a unique feature that allows you to sequentially turn up to five of your home entertainment devices on or off with a single key press. Note: The Master Power (POWER) only works in STB mode. If it is not programmed, only the set-top box will turn on or off.
Volume Lock allows you to control the volume through the device identified as having your primary speakers(s), regardless of which mode you are using. On the Potenza ST Remote by default the global volume Lock is set to TV, so you can control TV volume while in the TV, DVD, AUX, or STB mode.
(on your original remote control) that you want the Potenza ST Universal Remote Control to learn. 5. On the original remote, press and hold the key to be learned. The Potenza ST Remote Control’s LED will blink...
Page 11
rapidly, then turn off. Continue holding the key on the original remote until the LED blinks twice. NOTE: If the LED displays one long blink, a learning error has occurred. Try repeating this step again until a successful capture occurs. If the function is still not captured, press and hold SETUP to exit programming and review the “Learning Precautions”...
TROUBLESHOOTING PROBLEM: Device key does not blink when you press a key. SOLUTION: Replace the batteries with two (2) new AA batteries (see “Installing Batteries” on page 8). PROBLEM: Device key blinks when you press a key, but home entertainment device does not respond. SOLUTION: Make sure you are aiming the remote control at your home entertainment device and that you are within 15 feet of the device you are trying to control.
Page 13
Final Brand Setup Code List – Potenza ST ###### Setup Codes For Audio - Amplifier (A) ###### Anthem 2220 Classé 1915 Denon 2134, 2706 Halcro 1934 Harman/Kardon 3045 Krell 2463 Marantz 2138, 2463 Parasound 1934 ###### Setup Codes For Cable Set Top Box (C) ######...
Page 17
Samsung 1377 Satellite Operations 0775 TDS Telecom 0775 Teleview Communications 0775 Telus 0775 Triangle Communication System 0775 United Satellite America 0775 United States Wireless 0775 USA Wireless Satellite TV 0775 Windstream 0775 World Satellite Cable Systems 0775 ###### Setup Codes For Television (T) ###### Acer 1339 Admiral...