Advertisement
Quick Links
EN
Apollo 7 True Wireless
Headset
Pairing Apollo 7 with a
Bluetooth-enabled device for the
first time
Insert either earbud in your ear, then press and hold
its button until you hear "Power On", followed by
"Pairing", then release the button and connect to your
paired device, tap "Apollo 7-L" or "Apollo 7-R" in the
Bluetooth device list and you will hear
"Phone Connected". Next, insert the second earbud
and press/hold its button until you hear "Power On".
Release the button, and you will hear
"Headset Connected". This means the two earbuds
are in sync.
*You can enjoy the music by pairing earbud
individually, but we suggest pairing both with the
same device so you can answer calls or activate
Siri/Google voice assistance.
Single-touch multifunction
Power on/off, volume up/down, pairing, play/pause,
play next/previous track, call accept/reject, and Siri
are accessible with one button. Please read and
follow these guidelines to ensure the best and safest
experience with your Apollo 7
Specifications
Bluetooth version
Bluetooth profiles
Audio codecs
Wireless range
(from paired device)
Battery capacity
Driver size
Sensitivity
Frequency
Impedance @ 1kHz
MEMS omnidirectional
microphone input sensitivity
Water proof
4.1
A2DP 1.2, AVRCP 1.4, HFP 1.6, HSP 1.2
aptX/AAC/SBC
10 meters (30 feet)
Earphone (50mAh)
Charging case (Li-Ion rechargeable,
300mAh)
Ø 5.8mm Micro Driver
100dB/mW
20Hz-20KHz
16ohm
-42dB (+/- 2dB)
Nano coating technology
Advertisement
Summary of Contents for Apollo 7
- Page 1 "Power On", followed by "Pairing", then release the button and connect to your paired device, tap “Apollo 7-L" or “Apollo 7-R” in the Bluetooth device list and you will hear "Phone Connected". Next, insert the second earbud and press/hold its button until you hear "Power On".
- Page 2 Dimensions Earphone: 15.4mm (D) x 22.2mm (L) 6.06in (D) x 8.74in (L) Charging case: 62.5mm (L) x 40mm (D) x 25.5mm (H) 2.46in (L) x 1.6in (D) x 1in (H) Weight Earphone: 4g x 2pcs / Charging case: 52g 0.14oz x 2pcs / Charging case: 1.83oz Basic Phone Play...
- Page 3 PLACE PUSH UNTIL CLICK-IN/CHARGING STARTS **Charging case light indicators and notices ** With both earbuds inserted: Charging case LED 2 turns on, then off when headset is fully charged With 1 earbud inserted: Charging case LED 2 flickers and turns off after single earbud is fully charged If charging case battery is lower than 30% (with earbuds inserted) the LED 1 flickers as a reminder to...
- Page 4 7.If not used long term, recharge the headset and charging case every three months to maintain battery lifespan and prevent premature performance degradation 8.Do not leave the charging case fully out of power for prolonged periods (LED indicator remains dim) to prevent battery damage.