HEADRUSH Pedalboard Quick Start Manual page 8

Views
HeadRush Pedalboard's footswitches can be used not only to activate or deactivate models (amps, cabs, or
effects) but also to select rigs or setlists. The middle eight footswitches are always in one of four modes:
To change the view:
1. Press and hold the lower-left footswitch until
Exit appears in its display. The adjacent four
footswitches now correspond to the four
views: Stomp, Rig, Hybrid, and Setlist.
2. Press a footswitch to enter that view.
Stomp View
The middle eight footswitches correspond to
models (amps, cabs, or effects) in your signal
chain. Press a footswitch to activate or deactivate
its model.
Rig View
The middle eight footswitches correspond to rigs
you have saved. Press a footswitch to load its rig.
To show the previous or next four rigs, press
the upper-left (Bank ) or lower-left (Bank )
footswitch.
Hybrid View
The upper middle four footswitches correspond
to rigs you have saved. Press one of these
footswitches to load its rig. The lower middle four
footswitches correspond to models (amps, cabs,
or effects) in your signal chain. Press one of these
footswitches to activate or deactivate its model.
Setlist View
The middle eight footswitches correspond to
setlists you have saved. Press a footswitch to
load its setlist.
8
Exit Stomp
Rig 
Model 1 Model 2
Rig 
Model 5 Model 6
Bank 
Rig 1
Bank 
Rig 5
Bank 
Rig 1
Bank 
Model 1 Model 2
Bank 
Setlist 1 Setlist 2
Bank 
Setlist 5 Setlist 6
Rig Hybrid Setlist
Model 3 Model 4
Model 7 Model 8
Rig 2 Rig 3 Rig 4
Rig 6 Rig 7 Rig 8
Rig 2 Rig 3 Rig 4
Model 3 Model 4
Setlist 3 Setlist 4
Setlist 7 Setlist 8
Looper
Tuner
Looper
Tuner
Looper
Tuner