Advertisement
Quick Links
Advertisement
Related Manuals for CallingSYS ZJ-41E2
Summary of Contents for CallingSYS ZJ-41E2
- Page 1 WATCH WIRELESS CALLING RECEIVER USER MANUAL...
- Page 2 Watch wireless calling receiver I Preface The product concentrates the technology of wireless transportation, digital identify, dot matrix LCD display and microprocessor together to realize the functions of time display and wireless calling. The product uses removable rechargeable battery with long standby time and safe charging circuit.
-
Page 3: Technical Data
III Technical Data 1) Working voltage: DC3.7V rechargeable Li-poly battery 2) Working frequency: 433.92MHz 3) Working current: 57mA±10mA (buzzer mode) 95mA±10mA (vibration mode) 4) Standby current: <8mA 5) Power-off current: 180±5μA 6) Receiving sensitivity: -108dBm 7) Decoding: learning code 8) Modulation: AM IV Diagram 1. - Page 4 Press the button 3s to enter settings; In pairing setting, press the button to change the cursor position; In deleting setting, press the button to delete one paired call button. In calling status, press the button to delete one calling record. Press the button 3s to power ON/OFF the receiver;...
- Page 5 3. Diagram of settings menu Button define Define call button pin function Button word Each button displayed word can be changed General Advanced mode If off, only work 1/2/3/4-button call buttons Back light time 5~15s Back light time Prompt times Vibration or buzzer prompt time 1~10 times Digits + letter mode, like A1b3 General mode...
-
Page 6: Using Method
V Using method 1. Wear the watch receiver to the wrist, and put the call buttons in suitable place. 2. Press "POW" 1s button to power on. 3. Pair the call buttons with the watch receiver. (refer to below instruction) 4. - Page 7 status, press “SET” button 3 sec to enter settings. The main settings are: Settings Settings 1/10 8/10 Display Order General Auto clear time Pair buttons Language Delete buttons Date&Time Prompt mode Restore default Display mode 1.General In general settings, set the basic function of the watch receiver. Each call button has one ID number, on the call buttons, there are one or more press buttons, each buttons has different data pins as below: Data pin...
- Page 8 3) Advanced mode: if not open advanced mode, the watch receiver only receive the D0/D1/D2/D3 data. 4) Back light times: set back light time from 5s to 15s. 5) Prompt time: set vibration or buzzer times from 1 to 10tims. 2.
- Page 9 3. Delete buttons There are 3 ways to delete paired call buttons: 1) List del button: in this mode, all the paired call buttons are showed in the list, you can select one by one and press [SET] button to delete. 2) Search del button: if there are too many paired call buttons, it is hard to select one.
- Page 10 2) List: all the calling records display in the list, each page displays 3 records. press [UP/DOWN] button to page up/down. If one call button called many times, only one record and calling times are showed. 3) List all: same to “List” function, but if one call button called many times, all records are showed in the list, not show calling times.
-
Page 11: Other Functions
10. Restore default There are 3 options, select one and press [SET] button to restore. 1) No – Nothing restored. 2) Restore part – only system settings are restored to factory default except pairing information. 3) Restore all – all settings will be restored to factory default including pairing information. -
Page 12: Packing List
VIII FAQ Charge the battery; Check the bat voltage; LCD has no display Change the screen cable Check the screen cable Some call button Battery of call button Change the battery has less distance is close to empty of call buttons The watch receiver Check power adapter;...