Index 1. Notice Before Using 2. Package Contents List 3. Product Introduction 4. Charging the Headset 5. Power On/Off 6. Pairing the Headset with a Bluetooth Device 7. Pairing to 2 devices 8. Wearing the Headset 9. Answering Calls 10. Refusing Calls 11.
1. Notice before Using ® ® Thank you for purchasing the MOTOR TREND Bluetooth Headset MT-5000. Please check the contents of this package to verify the items listed in the Package Contents List below to has been included in your package. Be sure and read this User Guide before you use the Headset. The...
Before using the Headset for the first time, be sure and fully charge the unit at least 3 hours. 4. Charging the Headset MT-5000 comes with a built in Lithium Polymer battery. To charge the unit: a. Plug the travel charger into an electrical outlet or plug the car charger into cigar lighter..
When your mobile device is in the stage of searching for a new Bluetooth device, it should locate and pair with the MT-5000. g. On your mobile device, please choose and confirm the MT-5000 as your Bluetooth paired device. h. Key in the Headset Passcode “0000” and press “YES”. If the pairing is successful, the Indicator light on the Headset will flash the blue light only.
c. Should one of the following occur, the paired devices should remain paired: 1. The power for or of the devices is off. 2. The service or one of the devices is off. 3. One of the devices is re-switched on. 7.
Motorola. 10. Refusing Calls To refuse a call, wait to hear from our receiver, and then press the VOL+ 2 twice quickly to refuse the call. If you have the mobile device set to automatically answer calls, refusing call as described here will not apply.
Page 8
· If you encounter a problem, turn the Headset off immediately. · If the inside component(s) break, please contact Premier Accessory Group, toll free 866-446-4327, for immediate service and support. 19. Specifications Model NO. MT-5000 Standard Convention/Signal Output Bluetooth V2.1+EDR, Class II Frequency Band 2.4GHz~2.4835GHz,ISM Band...
Page 9
30 feet. ★ Some Bluetooth mobile phones support only one Headset. In this case, if you pair the MT-5000 Headset with the device, the other Bluetooth Headsets may be deactivated. Likewise, if you pair other Bluetooth headsets with this type of mobile device, the...
Page 10
Q: How far is the working distance between the Headset and the mobile device? A: The MT-5000 is certified by BQB, is compatible and compliant with Bluetooth V 2.1,Class II, the longest working distance between the devices is 30 feet. Please be aware, this distance may be affected by interference with surrounding i.e.
The MT-5000 is FCC certified and complies with part15 of the FCC rules. BQB Qualification: The MT-5000 Bluetooth Headset, a BQB Qualified Bluetooth product is listed as qualified End Product in accordance to Section 6.2.4 of the PRD. 27. Limited Warranty This warranty covers defects in materials and workmanship of Premier Accessory Group, ®...
Page 12
Long Island City, New York 11101 USA LEGAL NOTICE: This product is manufactured under license for SOURCE INTERLINK ® MAGAZINES, LLC, the publisher of MOTOR TREND Magazine and a SOURCE INTERLINK MEDIA company. Premier Accessory Group, LLC-2011 All Rights Reserved, U.S. & International patents, trademarks, copyrights and registrations issued and pending.
Page 13
FCC ID: ZJVMT-5000 IMPORTANT REGULATORY INFORMATION This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions: 1. This device may not cause harmful interference 2. This device must accept any interference that is received, including any interference that may cause undesired operation.
Need help?
Do you have a question about the MT-5000 and is the answer not in the manual?
Questions and answers