Assembly Instructions; Troubleshooting - Aqua Creations PWFD8051a Manual

Assembly Instructions

Product code : PWFD8051a
1. Attach tubing to your pump
2. Attach cable from pump to the
LED

Troubleshooting

Check the water level is covering the pump by at least 5cm.

Check the flow dial (model dependant) on the pump to ensure the correct flow rate.

Check that all connections are firmly secured

Turn off power and clear the pipe and impeller from blockages.

Check the fuse in the plug.

If the lights (model dependant) and the pump are not working, the transformer may have failed. If the water feature

is within warranty and has not been damaged due to misuse a replacement part will be offered.
If the water feature lights (model dependant) stop working, new lighting systems are available to purchase from

your nearest retailer or Hamac Trading Co. directly.
If the water feature lights are still working and the water is not flowing, the pump may have failed. If the water

feature is within warranty and has not been damaged due to misuse a replacement part will be offered.
• For consistency of water flow, please ensure your water feature is placed on a level base.
Water evaporation is a result of weather conditions, ensure your water feature is topped-up on a regular basis.

If any parts are missing or if your water feature is damaged, please contact your stockist as soon as possible.

3. Attach pump cable to
transformer
www.hamactrading.com
4. Fill water feature with
water until pump is submerged
5. Plug into electrical mains outlet