1. Manuals
  2. Brands
  3. Teledif Manuals
  4. Emergency Phone
  5. T-gsm
  6. User manual

Teledif T-gsm User Manual

Gsm emergency alarm and communication system
Hide thumbs Also See for T-gsm:
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
T
gsm
•
GSM Emergency
Working with love is a bond with our customers
Alarm and Communication
System
TELEDIF ITALIA S.R.L.
Strada della Pronda 66/8 bis - 10142 TORINO - Italy
Tel.: +39 011 7070707 Fax: +39 011 7070233
Web: www.teledif.it E-mail: teledif@teledif.it
User Guide
Certified UNI EN ISO 9001:2008 Cert. n° ER/ES-1072/ 2002
SW 2.2
Edizione 11 del 01/09/11
24
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T-gsm and is the answer not in the manual?

Questions and answers

Related Manuals for Teledif T-gsm

Summary of Contents for Teledif T-gsm

  • Page 1 System TELEDIF ITALIA S.R.L. Strada della Pronda 66/8 bis - 10142 TORINO - Italy Tel.: +39 011 7070707 Fax: +39 011 7070233 Web: www.teledif.it E-mail: teledif@teledif.it User Guide Certified UNI EN ISO 9001:2008 Cert. n° ER/ES-1072/ 2002 SW 2.2 Edizione 11 del 01/09/11...
  • Page 2 Programming by SMS • Up to 12 telephone numbers associated to different calls or alarms The cost of transport to and from the service center of Teledif Italia is always charged to the customer. ECHNICAL SPECIFICATIONS The equipment to be repaired under warranty must be shipped toTeledif Italia in its original pa-...
  • Page 3 NDICE C.4) ERRORS ___________________________________________ IRING DIAGRAM - B.1 ________________________ IRING DIAGRAM WITH ELEDIF ABIN PANEL By lifting a handset of a local telephone under error condition it is possible to listen to the error - C.1 _________________________________________________ ELF TEST detected. - C.2 ________________________________________________ PERATION...

  • Page 4: Telephone Directory

    It is possible, on demand, to customize the codes identifying the type of the call. Please refer to bling. Teledif technical services. Currently only two modes are available. The mode can be selected by setting parameter 11 (ref section C.3.1, page 13).
  • Page 5 C.3.7.1) REPORT “ALARM SENT” AND “ALARM RECEIVED” B.1) WIRING DIAGRAM WITH TELEDIF CABIN PANEL The signals for the cabin lamp relevant to Alarm Sent and Alarm Received are provided accor- For proper operation it is advisable to install ding to the recommndations; T.gsm manages even better these signals by connecting them to T.gsm at least 2 meters from electromagnetic...
  • Page 6 C.3.7) RELAY PERATION RELAY T.gsm has the following 4 status: SELF TEST PARAMETER VALUE Yr Value FUNCTION NOTE OPERATION fault PROGRAMMING 0 = Relay 1 is active for the duration ERROR of the DTMF C.1) SELF TEST 1 to 4: Realy is active from 1 to 4 seconds.
  • Page 7 C.3.6) TECHNOLOGIC ALARM 1 (T1) and TECHNOLOGIC ALARM 2 (T2) or C.2.1.1) Local telephones Gong sound 1 and 2 T.gsm supports 3 local phones: Phone 1 = Pit TECNOLOGIC ALARM 1 and 2 or GONG Phone 2 = Cabin Roof PARAMETER Phone 3 = Engine Room VALUE...

  • Page 8: Battery Alarm

    BATTERY ALARM C.2.1.5) Battery alarm PARAMETER VALUE Default FUNCTION NOTE T.gsm generate a battery alarm whenever the battery voltage drops below the programmed Value value for a programmed time. Max 20 Tel No. for Battery digit Alarm The system is also equipped with a data input (CN2-8 and ground) to manage a signal coming 0 to 9 Number of loops 0 = ENDLESS...

  • Page 9: Remote Diagnostic

    GSM repeaters and to the noise in case of weak signal. In this case the following precautions must be used in sending DTMF tones: Teledif Italia does not assume any responsibility for errors or for expenses charged by any Only send DTMF when system messages are ended operator for any reason.
  • Page 10 C.2.1.11) Answer to an alarm call generated by T.gsm To delete a stored telephone number or a previosusly set value start the programming mode for the parameter and enter an empty “value”. Example 11 82 **. When the operator of the call center answers the call, he receives the System ID message (recordable message, parameter 30) followed by the message indicating the alarm originator If it is required to send and SMS instead or in addition to the phone call when a Cabin or Maintai- (cabin, pit, cabin roof or engine room) and by the instructions on how to accept the alarm and...

  • Page 11: Remote Control Codes

    C.3.2) - MAIN AND MAINTAINER ALARM (PIT, ROOF, ENGINE ROOM) C.2.2) System access and control codes - AUXILIARY ALARM OR FILTER MAIN ALARM - END OF ALARM The access to the system is possible in two ways: From a local phone: MAIN AND AUXILIARY ALARM 1.

  • Page 12: System Parameters

    C.3) PROGRAMMING C.3.1) SYSTEM SETTINGS Programming allows to Read and Write system parameters and use the following syntax: SYSTEM PARAMETERS To Write: PARAME- VALUE FUNCTION NOTE WRITE CODE (11) PARAMETER STAR (*) VALUE + STAR (*) fault lues To Read: READ CODE (12) PARAMETER Reset all parameters to...

Table of Contents