Advertisement
Physical Installation
1. Move the Day/Night HD Camera to where it is to be placed.
2. Connect the Ethernet cable to the LAN port of the Day/Night HD Camera.
3. Connect the DC cable to the Ethernet cable.
4. Connect the supplied power adapter to the DC cable to power up the Day/Night
HD Camera.
CAUTION: Use only the power adapter provided. Using a different one may lead to
hardware damage.
5. Check the LEDs:
›
The Power LED should come on briefly, then start to blink. It will blink during
startup, which takes 15 to 20 seconds. The Power LED will turn to solid on when
the startup process is complete.
›
The Network LED should be ON.
3
Smart Home Monitoring | Day/Night HD Camera | Manufacturer's Installation Guide
Advertisement
