Brookstone MY LIFE Operating Instructions Manual page 16

PhoTos
(continued)
i want to... Do this...
Activate Photo 1. When in either Full Screen or Thumbnail mode,
Smooth Feature. press MENU.
2. Press
3. Press
4. Press SELECT to save choice. Selection will appear
in blue at the top of the list.
5. Press EXIT to exit menu.
Activate Dynamic
1. When in either Full Screen or Thumbnail mode,
Lighting Feature.
press MENU.
2. Press
menu selection.
3. Press
4. Press SELECT to save choice. Selection will
appear in blue at the top of the list.
5. Press EXIT to exit menu.
Rotate photo.
1. When in Full Screen mode, press
photo to rotate.
2. Press ROTATE. Photo will rotate 90 degrees.
3. Press ROTATE again to rotate photo another
90 degrees. Photo will be saved in rotated
position when on internal memory only.
Arrange my photos
1. The frame automatically arranges photos
.
in a specific order
by file name numerically, then alphabetically.
2. For example, a photo with the file name
"01.jpg" will come before a photo with the
file name "a.jpg. "
3. Using your computer, rename your photo files
numerically or alphabetically and copy the photos
onto the frame.
HelpFul Hints: if ordering photos numerically,
be sure to start with "01", "02", etc... not "1", "2",
as "10" will come before "2. "
630855_INS_MyLife 8"DigitalFrame_Size: 5.5"Wx8.5"H_Output:100%_Prints:1/1_Blk
to go to the "Photo Smooth" menu selection.
or to highlight "On".
to go to the "Dynamic Lighting"
or to highlight "On".
or to select
15
mUsiC
(continued)
i want to... Do this...
Copy my music onto
COPY ALL SONGS
the frame from my
1. Insert your memory card or flash drive
memory card or flash drive
into the frame.
(ADVANCED continued).
2. Press
3. Press SELECT.
4. Press MENU.
5. Press
6. Press
7. Press SELECT.
8. Prompt will come on screen to confirm all songs
to be copied. Press SELECT to confirm. After all
songs are copied, the unit is in Music List mode.
Copy my songs 1. Insert one end of a USB cable (not included) into
onto the frame the USB In port on the unit and the other end of
the cable into your computer's USB port.
using my computer.
The frame display will show "USB Connected"
and an external "MyLifeFrame" drive will appear
on your computer.
2. Drag and drop music files from your computer
to the "MyLifeFrame" external drive.
3. Disconnect the "MyLifeFrame" external drive from
the computer properly to avoid any loss of data.
28
or to highlight MUSIC.
to go to the "Copy" menu selection.
or to highlight "Copy All. "