Advertisement
Quick Links
Advertisement
Related Manuals for Hydropath HydroFLOW K40 Aquaklear
Summary of Contents for Hydropath HydroFLOW K40 Aquaklear
- Page 1 ELECTRONIC WATER CONDITIONERS USER GUIDE IMPORTANT READ THESE INSTRUCTIONS BEFORE FITTING...
- Page 2 HYDROPATH Technology | The home of...
- Page 3 CONTENTS LOCATION 01-02 INSTALLATION & ELECTRICITY 03-04 TROUBLESHOOTING & LOOPS 05-06 GUARANTEE 07-08...
- Page 4 LOCATION For optimal performance, the water needs time and turbulence after passing though the unit so that the particles will flocculate (clump together), and be easier to remove. The pump provides this turbulence, so the ideal location for the K40 is before the pump (B), as far back as possible in order to allow the maximum time for flocculation.
- Page 5 01-02...
-
Page 6: Installation
INSTALLATION Connect the main body of the unit to the pipe with the (C & two tie wraps Loosely assembly the ferrite ring around the pipe using the thumbscrews and nuts (E). When the ring is assembled, tighten the screws by hand (F). 4. - Page 7 03-04...
-
Page 8: Troubleshooting
TROUBLESHOOTING The red light shows that the signal is being transmitted into the water - it should be bright. If this is not the case check the following: The ferrites should be assembled and the screws tight. 2. The mains supply should be on. Check that the PSU is fully plugged into the mains and that the DC jack is fully plugged into the unit. - Page 9 05-06...
- Page 10 Guarantee claims are strictly limited to the value of the original purchase price and HYDROPATH accepts no responsibility for any consequential loss that may result from a product failure.
- Page 11 07-08...
- Page 12 FOR ONLINE VERSIONS OF THESE INSTRUCTIONS IN VARIOUS LANGUAGES, GO TO WWW.HYDROPATH.COM/INSTRUCTIONS 44 (0) 1159 869 966 44 (0) 1159 869 944 hydropath_tech @hydropathtech sales@hydropath.com @hydropath www.hydropath.com...
Need help?
Do you have a question about the HydroFLOW K40 Aquaklear and is the answer not in the manual?
Questions and answers