Table of Contents
Advertisement
6
Screwing the screw
1.Screw the upper 2 point of the SLIDE LOWER
using SCREW Assmebly JIG
8
Shield Can Assembly
- Assemble the Shield Can just like in the picture
above.
※
Be careful not to rumple and tear the Gasket
the shield cover.
When assembling
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Disassembly and Assembly Instructions
7
Placing the Main key pad
1. Check the printed condition of the MAIN
KEYPAD.
2. Place the MAIN KEYPAD.
9
Attach the electric conduction TAPEs.
PBA Assembling
1. Open the slide ASS'Y only half and then put
the PBA on the PBA JIG.
2. drive the slide FPCB connector.
11-9
Advertisement
Table of Contents
