Charging; Register & Setup - ACTON ROCKETSKATES R10 Owner's Manual

Changing the Footpad (short footpad available from Online Store)
The RocketSkates™ come with a long footpad installed. This should fit shoe sizes
Women US 6, UK 4 and larger. Men US 6.5, UK 39 and larger. If your shoes size is
smaller, you have the option of swapping the footpad to a shorter one.
1
Use the attached wrench to remove
both screws on the footpad. Remove
the screws, nuts and washers.
B. Charging
Failure to recharge the battery at least once a months may result in excessively
degraded battery performance. The battery requires charging for at least 2 hours
before first use.
The charging port is at the top center
section of the ankle cushion. Plug into
this port first, then plug the charger into
the wall outlet.
C. Register & Setup
RocketSkates™ can be connected with the app through Bluetooth. Please download
the "ACTON" app to your phone. The app is currently available for Android
versions 4.3+, and iOS iPhone 5+. When the app is opened for the first time, the
registration process will help you through some features that allow the RocketSkates™
to better suit you, and therefore enhance your riding experience. These features include
accurate information at setup. For your safety, please set to BEGINNER mode on the
app home page to start. Only set to NORMAL mode when you are a comfortable rider.
Only set to PRO mode when you are very familiar with the RocketSkates™.
2
Slide the new footpad on and put
the washers and nuts back and tighten
both screws.
During charging, the red light on
the charger should be on. Once the
RocketSkates™ are fully charged, the
light on the charger will turn green.
8