All the assemblies of this kit have passed our quality control program to ensure your Make Audio speaker kit build will be successful! All parts required to assemble this kit are included. The only tool you require for assembly is a Philips screwdriver.
Usually listening at low sound pressure level below 77 dBA Listening room acoustically treated with absorbers Listening to music genres that you prefer to be extra highly detailed and transparent Make Audio Annex Basic Kit Assembly Instructions Revision 1.0 pg. 3...
Page 4
The bass effect is shown in the graph below. The cut port can be glued back together with cynoacrylate (Crazy Glue) or joined with duct tape. Make Audio Annex Basic Kit Assembly Instructions Revision 1.0 pg. 4...
Using shape scissors, cut a 1” long slit in the damping aligned with the rectangular opening in the back of the cabinet as shown below. Make Audio Annex Basic Kit Assembly Instructions Revision 1.0...
Page 6
The wires will prevent the damping from directly on top of the crossover and a gap between them is normal. Make Audio Annex Basic Kit Assembly Instructions Revision 1.0 pg. 6...
Page 7
Ensure the port is fully pushed down on the back baffle surface such that there is no gap between the port tube flange and the baffle surface as highlighted below. Make Audio Annex Basic Kit Assembly Instructions Revision 1.0...
Page 8
The bumpers can also be installed on your speaker stands. Congratulations! You have completed assembly of the Annex Bookshelf / Monitor Speaker. If you have questions about this document or the assembly of your speaker, please contact us at makeaudio@teroindustries.com...