Operation And Controls; Front And Rear Views - Pico Macom MPC-12R Installation And Operation Manual

MPC12R.qxd 7/7/06 10:46 AM

Operation and Controls

MPC-12R

Front and Rear Views

1. MPCD: Demodulator accepts any NTSC television signal from 54 to 806 MHz and converts it to baseband video and
audio.
2. MPCMA: Modulators are fully agile from 54-860 MHz, including HRC and IRC offsets. The MPCMA is also adjacent
channel capable.
3. MPCM45: Modulators are factory re-tunable within band. They provide adjacent channel capability for VHF channels
2-ZZZ, UHF channels 14-69 and cable channels 2-125, including HRC and IRC offsets.
4. MPC-HSS Power Supply: Hot swappable redundant power supply supplies, provides +12 Vdc and +5 Vdc to the mod-
ulators and demodulators. MPC-HSR power supply input will operate from 90 to 264 Vac.
5. Power Supply Power Distribution Bracket: This device provides the interface for the MPC-HSS power sup-
plies and the MPCM45, MPCMA and MPCD modules.
6 Power Cables: Easily removable cables provide DC voltage from MPC-HSR power supply to the MPC-12R modules.
"Home-run" configuration allows removal of modules without disabling entire system.
6 Ph:800-421-6511
Rev. 07/06
Page 6
www.picomacom.com