Advertisement
Setting Up the Wireless Set
The mouse and keyboard have
are randomly selected when you press the
ID button. This helps protect against
interference from other wireless devices in
the same area.
Important:
The word CONNECT labels the ID button
on the bottom of each unit. To press the ID
button, use a blunt pointed object, like the tip
of a ball point pen.
1 Connect the power cord and
modem/telephone cable to the
computer. Turn on the computer.
Receiver
2 On the bottom of the receiver, press the
ID button (D) once with a blunt pointed
object.
8
HP Pavilion home PC
Filename: 5219urf users guide US_revised(p11).doc
Template: Normal.dot
Author: pamela
Revision #: 2
Page: 8 of 13
Printed: 03/03/03 02:22 PM
The top activity LED (N, a
receiver will start flashing and will continue
255
IDs that
flashing until the next step are completed
or until 30 seconds pass.
Important:
steps 3, you must repeat steps 2, 3 to set the
IDs.
Title: hp pavilion home pc
Last Saved By: demi
blue
light) on the
D
If 30 seconds pass before you complete
Advertisement
