Do you have a question about the Vidar and is the answer not in the manual?
Questions and answers
Summary of Contents for SCHI Vidar
Page 1
VIDAR STEREO OR MONO POWER AMP IN NORSE MyThOlOgy, VIDAR WAS ThE STRONgEST gOD BEhIND ThOR. NOW, ThAT’S NOT A hINT ThAT A “ThOR” AMP IS COMINg. WE PROBABly WOUlDN’T SURVIVE ThE COPyRIghT lITIgATION. AND VIDAR IS PlENTy STRONg AND SMART.
Page 2
You already comply with. If you have some common sense, they know that Vidar is a true no-compromises amp— should seem pretty straightforward. In any case, read these at an insanely low price. What you may not know...
1 Right and Left Speaker Outputs. When using 3 AC Input. Connect to a wall socket with the Vidar as a stereo amp, connect your right speak- provided AC cord. Or you can use any IEC-type er to the right red and black output terminals and cord;...
Page 4
115VAC 450W INTELLIGENT POWER AMPLIFIER 1 and 2 Speaker Outputs. When using Vidar as 4 AC Input. Connect to a wall socket with the a mono amp, connect your speaker to the two provided AC cord. Or you can use any IEC-type top red terminals only.
Page 5
Flashing when turned on: the light will flash 2 Heatsinks. Ensure there’s plenty of space to for about 10 seconds as Vidar performs its each side and above the heatsinks, to avoid self-checks. If the amp continues flashing for over-temperature faults.
Page 6
1. Over-temperature. The heatsinks are too hot, fixed, you can reconnect the speakers and play and Vidar has shut down to protect its output. If music again. the amp is very hot, turn it off, wait a while for it 3.
5-yEAR lIMITED WARRANTy Schiit Audio warrants to the original purchaser that this product shall be free from defects in mate- rial and workmanship for five (5) years from the date of purchase. If a defect covered by this warranty occurs during this period, Schiit Audio will repair the defective product, free of charge. Date of purchase will be based on customer receipts, otherwise date of manufacturing will be used.
Need help?
Do you have a question about the Vidar and is the answer not in the manual?
Questions and answers