Tenda W311M User Manual page 23

How to connect to an encrypted wireless network?
1. Select a wireless network (encrypted) from the
available networks list and click
will direct you to the interface below.
2. Click inco to enter the screen below
where you are required to input wireless
password.
Connected successfully!
Indicates the current wireless
network is encrypted.
icon. It
Authentication Knowledge:
WEP: Supports 10/26-bit Hex characters and 5/13-bit ASCII.
WPA-PSK: Supports 8-63-bit ASCII and 8-64-bit Hex characters.
WPA2-PSK: Supports 8-63-bit ASCII and 8-64-bit Hex characters.
WPA-PSK/WPA2-PSK: Supports 8-63-bit ASCII and 8-64 -bit hex characters.
The Hex characters consist of numbers 0~9 and letters a-f.
ASCII characters consist of any Arabic digitals/letters and characters.
20