Specifications - Japan Radio Co. JSB-196GM Instruction Manual

8.1 JSB-196GM MF/HF Radiotelephone
(1) General
Frequency range:
Frequency tolerance:
Emission mode:
User definable channels:
Preset ITU channels:
Frequency switching time:
Communication mode:
Power requirement:
Compass safe distance:
Operating temperature:
Dimensions and mass:
(2) Transmitter
Output power and power reduction:
Duty cycle:
Occupied frequency band:
Carrier suppression:
Spurious suppression:
AF frequency response:
Microphone input:
Line input:
８. SPECIFICATIONS
Transmit: 1.6 to 27.5MHz (100Hz steps)
Receive: 0.1 to 29.9999MHz (100Hz steps)
±10 Hz or better (after 1minute warm-up)
J3E, A1A, F1B (DSC/TLX) , H2B and H3E (Reception only)
200ch (20ch X 10 Groups)
1722ch [ SSB:283, F1B(DSC:29, TLX:891), A1A:519 ]
0.1s or better
Simplex and semi-duplex
13.6V DC±10% (12.3V DC to 15.0V DC), negative-grounded
Tx: 40A max
Rx: 2A max
(Operable between 10.2V DC and 16.2V DC)
1.5 m
o
-30 to +55 C
250 mm(W) × 100 mm(H) × 260 mm(D), Approx. 7.4 kg
100 W ( 1.6 to 4MHz ) , 150 W ( 4 to 27.5MHz )
Intermittent cycle
J3E
F1B (DSC/TLX), A1A
J3E
-60 dB or less
350 to 2700Hz (6dB bandwidth)
600 ohms dynamic microphone (-40 dBm standard)
0 dBm, 600 ohms (Balanced)
3 kHz or better
0.5 kHz or better
-60dB or less
8-1