Advertisement
4. Connect the coax cable from the antenna to the TV.
5. SCAN FOR CHANNELS ON YOUR TV. This step is very
important. Your TV will NOT receive signals from
the antenna without doing a channel scan. See your TV's
menu screen for this process or refer to the instruction
manual that came with your TV.
NOTE: It is important to repeat this process and re-scan
for channels anytime you move or re-position
the antenna. It is also a good practice to repeat
this process from time to time in case there are changes
to the available TV signals in your area. If you ever lose a
channel, a re-scan may be all that is needed to
pick up that station again.
6. Contact us at 1-800-654-8483 if you need assistance.
ANTENNA HELPFUL TIPS
Maximize the number of channels you receive by placing the
antenna in several different locations to see which location
provides the best reception and the maximum number of
channels. Be sure to run a new channel scan on your TV in
each position. Refer to the instruction manual that came with
your TV if you are not sure how to do this.
Position or mount the antenna as high as possible for the
best performance. Face the Antenna Panel towards the
broadcast towers in your area.
Visit www.antennaweb.org or www.dtv.gov and look for the
DTV Reception Maps to determine the available television
stations and location of the broadcast towers in your area.
For further assistance, call 1-800-654-8483 for technical
support.
4
Advertisement
