Preparation For Use - Radio Shack ARCHER 15-1275 Owner's Manual

Make sure all connections have been made as outlined on page 4 and as
shown in the drawings in the "Operation" section of this manual. If you are
unsure about your connections, draw a diagram of your system and take it to
your local Radio Shack for advice.
To realize the maximum benefit from your Color Processor, your TV must be in
good working condition with the controls set for a normal color picture. The
other components of your video system must also be working properly. This
unit will not compensate for defects in other video equipment.
The initial settings for all the front-panel control knobs should be 12 o'clock (the
pointers straight up). Remember: signals will not pass through the Color
Processor unless the power (INTENSITY control) is on.
The usual setting for the MODE switch will be COLOR. Switch tem porarily to
BYPASS to compare the unprocessed color picture with the processed one.
Use the B/W position to eliminate false color (red, green, or blue tint) in black
and white pictures.
Remember: The INTENSITY control is active with all settings of the MODE
switch, as long as the power is on.

PREPARATION FOR USE

Control Settings
MODE Switch