Summary of Contents for Dagro Electronic X8100-MJ36
- Page 1 HD IP camera operating instructions Dear customer, welcome to use this product, before using this product, please read the operation instructions in detail, and keep this manual for future reference.
- Page 2 I 、 Realize your HD PTZ IP Camera.
- Page 3 II 、 Interface definition and connection diagram ① Network interface：using the network cable to access the Internet ② WIFIantenna：receive WIFI signal； ③ Memory card socket：insert memory card,support 32G:device can stock video/picture; ④ Power supply interface；connect power adapter III、Mobile phone software operation...
- Page 4 For better experience the convenience of this product , please download mobile phone software before using this product: 1 Mobile phone software download: 1)IOS user can download and install 163eye in APP Store. 2)Android user can enter website :http://163eye.cc ,download and install 163eye 3)You can also input http://163eye.cc...
- Page 5 Note： first time open the “163eye” software ， user need register one ID as following: ① choose below “register” to enter ② choose“mobile phone register”or“email register”，click “next” ③ input email box and password,click “next ”(when use email register, doesn’t need verification code ,register it directly; if mobile phone register,the verification code will be sent to the phone by message.) ④...
- Page 6 connection： A、please add the device to the 163eye device list： “Add device”,please view the fourth part for the detail steps. B、open 163eye software，１、choose“device”，click device name,choose “settings”；２、choose “network settings”３、（please don’t choose “WIFI” directly at the moment ）the following will search all of the WIFI signal near it automatically,choose your WIFI ID ４、input WIFI password Factory password is123,then open wifi successfully.
- Page 7 2）open the 163eye software,click“Device” ,choose the “ +” button ,choose “intelligent online”,click next and then choose the WIFI and WIFI password you need,click the “next” again ,connect the device. 3）Add device manually：in the device interface of the 163eye software,click the “+” ,input ID and password.（Factory password is123）...
- Page 8 5 The device monitor of mobile phone 1）、contact person：click the device icon that has been added in device list to entry the monitor mode . 6 The video settings of mobile phone. 1）、Video：this device supports 32GB TF card in max ,if need record video,please insert the memory card at first,and then open the 163eye :click Device ->Device name ->settings->video settings,user can choose record video manually ,alarm video, timing video.
- Page 9 alarm(433frequency),support 8 groups.The following is the learning code ways: A、Please add device to device list in 163eye software. B、Click Device->device name->settings->zone settings C、Eg:you want to learn one door sensor that installed in the hall,the serial number is 1.Click “Hall”-click number 1,pop-up: Click “confirm”，and trigger the alarm you will learn at the same time(take the door sensor as example,separate the door sensor will trigger the alarm).if match code successfully,the words will be turn blue from gray,and will...
-
Page 10: Alarm Setting
“arming,disarming”，but it need match with the device learning, here does not explain in detail. 2）delete match code ：click the access number that had learned, then confirm delete. 3）Alarm Setting： Arming：there are two ways : one press the infrared remote control arming key(lock key) that has learned successfully ;another is the arming keys (lock key) in the back of the APP contact list, after arming ,when there is a case, the device will send the alert to the APP actively , and send the scene... - Page 11 to download directly. 2 login account in PC A、there are two ways to login, select "remote login" ,use the ID( email/phone number/163eye account ID) that register in mobile phone to login directly, no need to register again. when the PC software choose “Login locally ”，the account is：admin password：None...
- Page 12 3 Computer terminal network connection (the same as mobile phone software operation three ", 3) 4 Add device to PC How to add the device to device list? Please refer to the specific method 3）In the left side of the "CMS" software interface, click the button ，...
- Page 13 Open CMS software，right click device name -》start monitor，as the following picture: 6 video setting in PC. 1）Video: this device can store the video in the computer hard disk, right click on the monitor screen ,select "start video" (note: be sure only in the computer monitoring condition ,the video can be stored in the computer hard disk) 2）playback：this device can playback the video from computer, open the...
-
Page 14: Restore Factory Settings
CMS software，click the replay button ， choose "playback" , user can find the playback files according to the date, then play it directly . (note: the video in computer hard disk only can be played in PC ,does not support playing in mobile phone ) V、Restore factory settings... - Page 15 Reset will erase all user Settings: including WIFI information,access password , alarm information, arming zone information. The steps:Find the reset hole at the bottom of the device,and then use needle to insert it ,press it more than three seconds after hearing "di" sound ,when hearing the sound like "draw the sword", reset successfully.
-
Page 16: Fcc Statement
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the X8100-MJ36 and is the answer not in the manual?
Questions and answers