Samsung SGH-X497 Manual page 9

Hide thumbs Also See for SGH-X497:
Table of Contents

Advertisement

The password is preset to "00000000" at the factory. To
change the phone password, see "Change Password" on
page 101.
Once the correct password has been entered, you can use
the phone until you switch it off.
The following options are available:
Disable: you are not asked to enter the phone password when
you switch on the phone.
Enable: you are required to enter the phone password when you
switch on the phone.
Change Password
The Change Password feature allows you to change your
current phone password to a new one. You must enter the
current password before you can specify a new one.
The password is preset to "00000000" at the factory. Once
you have entered a new password, you are asked to
confirm it by entering it again.
Privacy
Using this menu, you can lock your media contents, such
as picture messages, Voice messages, Voice list, images,
and sounds. Once you have locked the contents, you must
enter the phone's password to access the associated
menus.
1. To select an item to lock, press the Up or Down key. To
lock all of the contents, select All.
2. To place a check mark, press the
3. To remove a check mark, press the
4. To lock the marked items, press the OK soft key.
Section 8: Changing Your Settings
Security Settings
key.
key.
101

Advertisement

Table of Contents
loading

Table of Contents