Page 1
WITH BLUETOOTH ® Home NetWerks SPEAKER SIMPLE SOLUTIONS FOR A SMARTER HOME MODEL #7130-02-BT Español p. 14 For installation video go to: https://www.youtube.com/watch?v=qTU28V-cjVYx ® The BLUETOOTH word mark and logos are registered trademarks owned by BLUETOOTH SIG, Inc. and any use of the said mark by Homewerks Worldwide is under license.
TABLE OF CONTENTS Product Specifications ........................2 FCC Compliance ..........................2 Package Contents ..........................3 Hardware Contents..........................3 Safety Information ..........................4 Preparation ............................4 New Construction Assembly Instructions ...................6 Existing Construction Assembly Instructions ..................7 BLUETOOTH Speaker Fan Grille Installation ...................9 ® Pairing Light Switch with Fan ......................10 Pairing your BLUETOOTH Device to the Speaker .................10 ®...
PACKAGE CONTENTS NIGHT LIGHT PART DESCRIPTION PART DESCRIPTION Fan body Suspension bracket II Grille w/BLUETOOTH speakers Suspension Bracket III ® and light Wall switch Suspension Bracket I HARDWARE CONTENTS (not actual size) Long Wood Short Machine Screw Screw Qty. 8 Qty.
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. Always disconnect the power supply prior to servicing the fan, motor or junction box. Installation work must be carried out by a qualified person(s) in accordance to all local and safety codes including the rules for fire-rated construction.
Page 5
PREPARATION Tools Required for Assembly (not included): Hammer, Flathead Screwdriver, Wire Nuts, Nails, Duct Tape, Phillips Head Screwdriver, Utility Knife or Drywall Saw, Helpful Tools (not included): Electric Drill, Drill Bits WARNING: Turn off electricity at breaker box before beginning installation. Carefully remove unit from carton.
ASSEMBLY INSTRUCTIONS NEW CONSTRUCTION – ATTACHING TO THE JOIST BEFORE INSTALLATION Turn off power source. Review all safety precautions. 1. Insert suspension bracket onto fan housing using suspension bracket I (C) and II (D). If spacing between joists is 21.5 in. to 23.5 in. attach suspension bracket III (E).
ASSEMBLY INSTRUCTIONS 5. Secure the suspension bracket I (C) to fan housing using short machine screw (BB) (included). 6. Remove junction box cover. As shown in wiring Wall Green Wall switch diagram on page 5, using quick connect ports switch wire back view NIGHT LIGHT...
Page 8
ASSEMBLY INSTRUCTIONS 2. Measure the opening to assure it is large enough to accommodate the new fan housing (9.4 in. x 9.4 in.). 3. If this fan is not replacing an old fan be sure to cut a 9.4 in. x 9.4 in. opening for the fan housing.