Subscribe to Our Youtube Channel
Summary of Contents for Media MQ-1132 / SA
- Page 1 MQ-1132 / SA Evaluation Board Users Guide MediaQ Incorporated Board Revision 2 MQ-1132 / SA Evaluation Board Users Guide Board Revision 2 Revision A 4/12/01 Preliminary...
-
Page 2: Table Of Contents
MQ-1132 / SA Evaluation Board Users Guide MediaQ Incorporated Board Revision 2 Introduction..............................3 MQ-1132 Overview ............................3 Platform Description............................3 MQ-1132 Board Layout ..........................3 MQ-1132 Board Layout ..........................4 Connectors..............................4 Switches/Potentiometers/Miscellaneous ....................4 Jumpers...............................5 Platform setup instructions..........................5 Hardware Assembly ...........................5 Software Download ............................6 Functional Description...........................7 Flat Panel Interface.............................7... -
Page 3: Introduction
This guide is intended to give a brief overview of the MQ-1132 and describe the features and workings of the MQ-1132 / SA-1110 Evaluation Board. This includes how to locate connectors, configure switches, configure jumpers, and the configuration of this evaluation board with the Intel StrongARM SA-1110 (Assabet) and SA1111 (Neponset) platform. -
Page 4: Mq-1132 Board Layout
MQ-1132 / SA Evaluation Board Users Guide MediaQ Incorporated Board Revision 2 MQ-1132 Board Layout The location of the connectors, jumpers, switches and adjustable potentiometers are shown on the layout diagram below. These are described in the tables on the following pages. -
Page 5: Jumpers
PLATFORM SETUP INSTRUCTIONS The MQ-1132 / SA-1110 Evaluation Board is used in conjunction with the Intel StrongARM SA-1110 Reference Platform. The following components are required and should be included in the Intel SA1110/SA1111 development package: §... -
Page 6: Software Download
MQ-1132 / SA Evaluation Board Users Guide MediaQ Incorporated Board Revision 2 Software Download After the hardware is assembled, connect the serial and ethernet connectors to a properly configured host PC. The configuration of the host is beyond the scope of this document and should be covered in the StrongARM documentation. -
Page 7: Functional Description
MQ-1132 / SA Evaluation Board Users Guide MediaQ Incorporated Board Revision 2 FUNCTIONAL DESCRIPTION Flat Panel Interface The MQ-1132 / SA1110 Evaluation board has two connectors intended for interfacing to a variety of flat panel displays. Connector U12 is used to interface directly to a Sharp HR TFT display (LQ039Q2DS54) which is included in the SA1110 Platform Evaluation Kit. -
Page 8: Touch Screen / Mmc
GPIO pins that control a multiplexer on the board. One of the functions is a touch screen controller and the other is a Multi-Media Card (MMC) socket. For the touch screen, two connectors are provided on the board to interface with various devices. J24 mates with the flat cable connected to the touch panel provided with the Sharp HR TFT display (LQ039Q2DS54).
Need help?
Do you have a question about the MQ-1132 / SA and is the answer not in the manual?
Questions and answers