Tamprecords Mon-T2 Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Temprecord Mon-T

How to use Mon-T

The following are quick instructions only.

Please note there is a full Help Wizard built into TempWrite software, under the Menu bar.

Help Button shown below:

Requirements before first use:

•

Temprecord Reader Interface or generic USB Cable and the

•

TempWrite software. Software is available for FREE download from:

http://temprecord.com/our-software/tempwrite/

Temperature

Standard Temprecord reader

We recommend a reader to speed up processing batches of loggers

Software Installation

TempWrite software is available by downloading

http://temprecord.com/our-software/tempwrite/

Log on as Administrator to install software. Do not plug in reader or cable until after software is

installed. NOTE: TempWrite works on the following systems: Windows 7 , 8, 8.1 and 10

Temprecord International Limited

PO Box 58-430, Botany 2163 | 239D Burswood Drive, East Tamaki 2013 | Auckland, New Zealand

Phone +64 9 274 9825 | Fax +64 9 273 4020 | Email info@temprecord.com

www.temprecord.com

Loggers

Data Loggers

Temperature USB

from:

Temperature & RH USB

Generic Cable

Table of Contents

Need help?

Do you have a question about the Mon-T2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Tamprecords Mon-T2

Page 1 Temprecord Mon-T Loggers How to use Mon-T Data Loggers The following are quick instructions only. Please note there is a full Help Wizard built into TempWrite software, under the Menu bar. Help Button shown below: Requirements before first use: • Temprecord Reader Interface or generic USB Cable and the •...
Page 2 Mon-T Data Loggers Software Quick Icons Hover over the quick icons to bring up hints that identify function 1. To access logger • Insert logger in Reader Interface ensuring logger is placed facing upwards in reader as far as it can go with the hole visible outside the reader •...
Page 3 Mon-T Data Loggers • Once fields are populated press Program Logger to save these settings in the logger Start Logger Start the logger in TempWrite Software by clicking the Start icon Or start the logger by holding down Start/Stop button on the logger for 2 seconds if button has been enabled in TempWrite software.
Page 4 Mon-T Data Loggers Read Logger With TempWrite software opened and logger inserted press click the Read icon • Select Graph to view recorded data in Graph • Select Statistics to view full statistical data • Select Values to view full list of recorded data samples Temprecord International Limited PO Box 58-430, Botany 2163 | 239D Burswood Drive, East Tamaki 2013 | Auckland, New Zealand Phone +64 9 274 9825 | Fax +64 9 273 4020 | Email info@temprecord.com...
Page 5 Mon-T Data Loggers Export Files Select Export icon to save data as PDF or Excel files, Compliance made easy! Report set In the Export Screen select Report Set up Icon to choose what the PDF will include up icon Re-Use Logger. To re-use or re-program the logger, it must be in a Ready State.
Page 6 Mon-T Data Loggers LCD Version • To start or stop the logger using the button (if enabled in the software), hold button down until Start or Stop is showing on the LCD screen • When logger is running it will show the current temperature and/or humidity (depending on the model) •...