AMP UTY-XSZX Installation Manual

Air conditioner remote sensor

Advertisement

Quick Links

AIR CONDITIONER
AMP Air Conditioning

INSTALLATION MANUAL

INSTALLATIONSANLEITUNG
MANUEL D'INSTALLATION
MANUAL DE INSTALACIÓN
MANUALE D'INSTALLAZIONE
Ad uso esclusivo del personale autorizzato.
ΕΓΧΕΙΡΙΔΙΟ ΕΓΚΑΤΑΣΤΑΣΗΣ
MANUAL DE INSTALAÇÃO
РУКОВОДСТВО ПО УСТАНОВКЕ
KURULUM KILAVUZU
www.ampair.co.uk | sales@ampair.co.uk
Remote sensor
For authorized service personnel only.
Fernbedienungssensor
Nur für autorisiertes Personal.
Capteur distant
Pour le personnel agréé uniquement.
Sensor remoto
Solo para personal autorizado.
Sensore remoto
Απομακρυσμένος αισθητήρας
Για εξουσιοδοτημένο προσωπικό σέρβις.
Sensor remoto
Apenas para técnicos autorizados.
Дистанционный датчик
Для уполномоченного персонала.
Uzaktan kumanda sensörü
Yetkili servis personeli içindir.
PART No. 9366394068-02

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UTY-XSZX and is the answer not in the manual?

Questions and answers

Summary of Contents for AMP UTY-XSZX

  • Page 1: Installation Manual

    Απομακρυσμένος αισθητήρας Για εξουσιοδοτημένο προσωπικό σέρβις. MANUAL DE INSTALAÇÃO Sensor remoto Apenas para técnicos autorizados. РУКОВОДСТВО ПО УСТАНОВКЕ Дистанционный датчик Для уполномоченного персонала. KURULUM KILAVUZU Uzaktan kumanda sensörü Yetkili servis personeli içindir. PART No. 9366394068-02 AMP Air Conditioning www.ampair.co.uk | sales@ampair.co.uk...
  • Page 2 2 Not directly exposed to the outlet air from the air-conditioner. 3 Out of direct sunlight. 4 Away from the infl uence of other heat sources. 5 Not directly exposed to the air entering the room when the door is opened. En-1 AMP Air Conditioning www.ampair.co.uk | sales@ampair.co.uk...
  • Page 3 • Type Ι • Type ΙΙ • Type ΙΙΙ CN19 R.TH R.TH (WHT) R.TH (WHT) 3 The original connector should be insulated to ensure that it does not come into contact with other electrical circuitry. En-2 AMP Air Conditioning www.ampair.co.uk | sales@ampair.co.uk...
  • Page 4 Function Number “30” : Set Setting Number to “00” (Default) Function Number “31” : Set Setting Number to “02” [For Other Systems] (Applicable only to “HEAT & COOL MODEL”) 3 Set DIP switch according to the height (L) of the remote sensor from the fl oor. Floor •...

Table of Contents