Wireless Data Service; Connecting The Terminal To Pc; Installing The Management Program - Huawei ETS3253 User Manual

9

Wireless Data Service

Connecting the Terminal to PC

The FWT can be connected to a PC to provide data
services. You need to purchase the data service
suite. For details, please consult your service pro-
vider.
As show in the following figure, connect the end of
the data cable to PC and the other end to the data
port of the FWT.
• Switch off the FWT and disconnect it from
Note
power adapter before connecting.
• Use the cable provided by the manufacturer.
Installing the Management
Program
If you are using the data service for the first time, you
need to install the FWT management program. The
steps of installing the FWT management program are
as follows, which are for your reference only.
1
Connect the FWT to a PC with a compatible
USB cable.
2
Put the installation disk into the CD-ROM.
3
The installation program automatically starts,
and then the installation interface is displayed.
4
Follow the instructions of the installation pro-
gram.
17