Summary of Contents for SVS MINI 5 LIFT
- Page 1 SVS MINI 5 LIFT INSTALLATION MANUAL SVS, INC. Lifting Your Image 2513 Jenks Avenue Tel: 850-522-4747 Panama City FL 32405 Fax: 850-522-4739 www.svslifts.com sales@svslifts.com...
-
Page 2: Table Of Contents
6: Electrical Wiring and Lift Control ------------------------------------ Pg. 9 & 10 7: Mounting the Projector ------------------------------------------------ Pg 11 8: Cable Management ---------------------------------------------------- Pg 11 9: Setting the Show Position --------------------------------------------- Pg 12 P g 12 10: Maintenance and Adjustment ------------------------------------- P g. 13 SVS Mini 5 Lift Warranty ------------------------------------------------... - Page 3 SVS MINI 5 LIFT GENERAL DESCRIPTION: The SVS Mini 5 Lift is designed to support small LCD/DLP projectors. This model is an ideal solution residential or commercial applications with restricted ceiling clearance since projector is installed between the scissors. FEATURES:...
-
Page 4: 1: Preliminary Installation Checks
SVS Factory. Do not remove the lift's shipping blocks until instructed to do so (see Section 4-6). SVS scissor lifts are shipped in a slightly open position to eliminate stress on the limit switches and to maintain a tight cable pack on the drum. If physical height measurements are taken before the blocks are removed from the lift, they may not accurately reflect the actual measurement of the lift in a closed position. -
Page 5: 2: Considerations For Placement Of The Lift
Be sure to include the lens or any accessories which may add to the overall dimensions of the projector. Maximum dimensions that the Mini 5 lift can accommodate are 15" W (or 38.1 cm) x 23"D (58.42 cm) + lens extension if necessary – see figure 1 & 2. - Page 6 This will allow front-to-back or side-to-side adjustments if the lift is found to still be slightly offset with the screen once it has been installed. SVS MINI 5 LIFT MOUNTING ON EXISTING BEAMS ALWAYS FOLLOW THE LOCAL BUILDING CODES.
- Page 7 = MOUNTING HOLES Figure 5b. Important note for concrete ceiling installations: when attaching the lift to a flat ceiling, SVS suggests two (2) pieces of #P1000T Unistrut (approx. 10' long -3.04 m), to be installed on the ceiling first. Proper spacing between the 2 pieces will be based on the distance between the top four (4) mounting holes of the lift (as shown in Figure 1) .
-
Page 8: 4: Lift Installation
IMPORTANT: IF A #2 PLENUM SHROUD OR A #12 DECORATIVE COVER ARE TO BE INSTALLED WITH THE MINI 5 LIFT. PLEASE READ THEIR INSTALLATION INSTRUCTION BEFORE PROCEEDING. THE SUPPORTING STRUCTURE SHOULD ALSO ALLOW ENOUGH SPACE TO INSTALL THE MOUNTING HARDWARE OF THE DECORATIVE COVER AND THE PLENUM SHROUD. -
Page 9: 6: Electrical Wiring And Lift Control
6. ELECTRICAL WIRING AND LIFT CONTROL: Electrical Connections should be made at this time. The Mini 5 lift is controlled with a low voltage 24v/AC controller called the Key Switch Control Box. This controller can be easily connected to external controllers like Crestron, AMX etc. - Page 10 Wiring using Touch Screen Controller (Figure 8). IF USING ANY OTHER SYSTEMS, PLEASE CONTACT SVS FOR PROPER WIRING TO AVOID UNSAFE OPERATIONS. S V S M I N I 5 L I F T I N S T A L L A T I O N...
-
Page 11: 7: Mounting The Projector
8. CABLE MANAGEMENT: The SVS Mini 5 Series lifts all feature cable retainers installed on the scissor extensions in the rear of the lift. These retainers are used to keep cables and other cords securely out of the way during operation. It is not suggested to attach the cables to the scissors of the lift as they could get repeatedly pinched when the lift raises and lowers. -
Page 12: 9: Setting The Show Position
9. SETTING THE SHOW POSITION: The show position is adjusted by loosening the thumb screw on the show microswitch bracket, located on the upper motor frame -as seen in figure 11: a. Operate the lift in a service mode and lower the lift to the desired show position. -
Page 13: Svs Mini 5 Lift Warranty
SVS MINI 5 LIFT Warranty SVS provides a limited warranty on all products to cover failures due to defects in materials or workmanship which occur during normal use. This limited warranty does not cover failures which result from accident, misuse,...