Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Prime Tech H-066
- Page 1 USER'S MANUAL...
- Page 2 GENERAL INSTALLATION DIAGRAM Sensor Control Switch Horn Black wire - Earth Red wire + 12V ( ON//ACC) Yellow wire Display Control box Control box Control box Red wire + reversing light Black wire - reversing light Display Sensor Control box LCD DIGITAL DISPLAY Working Conditions When reverse the car, 8 sensors work at the same time.
- Page 3 DETECTING RANGE SENSOR INSTALLATION DIAGRAM Top View 70(cm) 30 150(cm) Side View Be sure no other part of vehicle falls into detecting range of sensors. 70(cm) 30 150(cm) DISPLAY STATUS ( Front detection ) ( Rear detection ) 0.6-0.8m 0.3-0.4m 0.6-0.8m 0.3-0.4m Safety Area...
- Page 4 1. Advised position to install the sensors The direction of sensors A. 4 drilled holes (A,B,C,D) should be under the same line. Vertical installation position to the ground Sloping installation position to the ground B. 0.5-0.8m vertically high to the ground, 0.55 is recommended.
- Page 5 3. Select drilling position for sensor B & C 6. Others A . M e a s u r e t h e d i s t a n c e between sensor A and D, get the result "L". Bracket 1 Fix the display on rear mirror...
- Page 6 H-066 INSTALLATION STEPS H-066 Parking Sensor System consists of ultrasonic sensors, digital control box and LCD 1. Choose right installation position for sensors display. The system detects the distance between the car and front/rear obstruction by 2. Select drilling position for sensor A & D Select drilling position for sensor 1 &...
Need help?
Do you have a question about the H-066 and is the answer not in the manual?
Questions and answers