Operation instructions | HKI 41-34 | HKI 41-35 | HKI 81-34 | HKI 81-35 Table of contents Product description ............................4 1.1. General..............................4 1.2. Scope of delivery ........................... 4 1.3. Connectors on the rear side ........................4 1.4. Typical Application..........................5 Mounting and Installation ..........................
Page 3
Safety instructions: ∂ The installation of the device and repair work on the device must be carried out only by a professional in accordance with the applicable VDE directives. In case of incorrect installation, no liability is assumed. ∂ Never open the device. There are no parts to be maintained by the user inside the device, however, lethal voltages are present.
Operation instructions | HKI 41-34 | HKI 41-35 | HKI 81-34 | HKI 81-35 2. Mounting and Installation Installation may be performed by authorized and skilled electricians only. Mounting and installation in a 19“rack The IPTV encoders are mounted in a 19" rack Mount the unit with four fitting screws (1).
3. IP integration The HKI 41-3x includes 1 controler and 4 encoders The HKI 81-3x includes 1 controler and 8 encoders All this sub devices have to be in the same IP adress space, to communicate with each other. 3.1. Default IP addresses and logins: The device is configured via the graphical user interface.
Page 8
Operation instructions | HKI 41-34 | HKI 41-35 | HKI 81-34 | HKI 81-35 Step – change the control port IP address in the required IP address space. Enter via browser the control port web interface (192.168.0.157) and configure it also in to required address space.
Page 9
Step – connect the devices to a switch Connect the control port, all encoders and the computer to a switch. Configure the encoders and system settings as described in chapter 4. 2017-07-25 | Technical changes, design modifications, errors and misprints are subject to change without prior notice.
4.1.3. Upgrade Click MAINTENANCE > Upgrade. Browse for the upgrade file on your computer. Click on Upload. The file will be uploaded and the flash memory will be upgraded After the end of the upgrade you can log in to the system again. 4.1.4.
Operation instructions | HKI 41-34 | HKI 41-35 | HKI 81-34 | HKI 81-35 4.2.1. Stream URL of the encoders Click ENCODER [#] > Status and scroll down to Main stream. The URLs of the main stream are shown (see red frame below).
4.3. Encoder Settings 4.3.1. Main stream Click ENCODER [#] > Encoder > Main stream. You can just keep the original data without making any changes, or the parameters can be adjusted according to practical applications. ∂ FPS Frames-Per-Second [5-60] – FPS depends on your output resolution, it can’t exceed the input frame rate. Otherwise the image will appear to have dropped frames.
Operation instructions | HKI 41-34 | HKI 41-35 | HKI 81-34 | HKI 81-35 ∂ HLS URL For HTTP Live Streaming (or HLS) which is an adaptive streaming communications protocol to communicate with iOS and Apple TV devices and Macs running OSX in Snow Leopard or later.
4.3.4. Advanced Click ENCODER [#] > Encoder > Advanced. Click Apply 4.4. OSD Setting 4.4.1. Streaming OSD Setting Click ENCODER [#] > OSD > Main stream. You can configure On Screen Displays in up to 4 different zones for the main stream. Change the Option Zone you want to parametrize from Disable to Enable.
Operation instructions | HKI 41-34 | HKI 41-35 | HKI 81-34 | HKI 81-35 Configure the X and Y coordinates on the screen. Type in the Text which should appear on the screen. Choose a Background color and the Color of the OSD.
5. Application examples 5.1. Preview with the stream with Windows Media Player Click ENCODER [#] > Status and scroll down to Main stream. Copy the TS URL. Start Windows Media Player. Press Ctrl + U. Paste the URL and click OK. The video will be streamed.
Operation instructions | HKI 41-34 | HKI 41-35 | HKI 81-34 | HKI 81-35 5.2. Multi Local User Application Multicast Way If many local users need watch the video of same HD encoder at the same time, we suggest using multicast.
5.3. Local Surveillance System Application NVR Connection Confirm if NVR support H.264 decoder. Since using ONVIF, you need enable the "RTSP" function. Click ENCODER [#] > Encoder > Main stream. Enable the RTSP URL, then re-power the HD encoder. If you need the NVR recognize the Audio of HD Encoder, you still need enable the Audio. Click ENCODER [#] >...
Operation instructions | HKI 41-34 | HKI 41-35 | HKI 81-34 | HKI 81-35 5.4. Remote Multi User Application RTMP Connection If many users from different location need watch the source of the same HD Encoder, we suggest you use RTMP.
Page 21
Check the collected data of HD Encoder, if it shows 0, then the HD Encoder connection is failed; you need check if the hardware connection is correct. Check the RTMP connection status, if it shows unconnected, you need check if the Net work setting is correct (You need set the IP Address to have access to the internet).