Making Connections - Hisense LTDN42K20US User Manual

Making connections

NOTES
Check the jacks for position and type before making any connections. Loose connections can result in image or color
problems. Make sure that all connections are tight and secure.
Not all A/V devices have the ability to connect to a TV, please refer to the user's manual of your A/V device for compatibility
and connections procedure.
Always unplug the power cord when connecting external equipment.
Connecting an antenna, cable or cable/satellite box
1. Turn off the TV before connecting the antenna.
2. Connect one end of a coaxial cable (not included) to the RF OUT jack on the antenna, cable or cable/satellite box. If you are
using an antenna with twin-lead cable, you may need a 300-75 ohm adapter (not provided) to connect it to the back of your
TV. Likewise, if you are using several antennas, you may need a combiner (not provided).
3. Connect the other end of the cable to the ANT/CABLE IN jack on the side of your TV.
Connecting an A/V Device with Composite Cable
1. Use the audio and video cables to connect the external A/V device's composite video/audio jacks to the TV's jacks. (Video =
yellow, Audio Left = white, and Audio Right = red)
2. Plug the connected devices into the mains socket before switching on the TV.
3. Select the corresponding source from the TV.
TV JACK
Getting Started
TV JACK
ANT/CABLE
Red(R)
White(L)
AV Cable
(not included)
Yellow(Video)
EXTERNAL DEVICES
or
VHF/UHF Antenna
R
Red(R)
L
White(L)
Video
Yellow(Video)
A/V OUT
5
Cable
ANT OUT
EXTERNAL DEVICES
VCR
DVD Player/Recorder
Video Satellite
Set-top box
antenna
Camera
cable
Satellite Receiver
Equipment with A/V jacks