Table of Contents
Summary of Contents for Gatco VT-00-M1
- Page 1 Vent-A-Lid Owner’s Manual and Assembly Published: Apr 17, 2017 Manual Part No.VT-00-M1 NOTE: Gatco Manufacturing Inc. believes in continuous improvement and as such, manuals, brochures and specifications are subject to change.
- Page 2 VT-00-M1...
- Page 3 EQUIPMENT PURCHASED ___________________________________________________________________________________ ___________________________________________________________________________________ ___________________________________________________________________________________ ___________________________________________________________________________________ I HEREBY ACKNOWLEDGE THAT I HAVE READ AND AGREE TO THE WARRANTY TERMS LISTED ABOVE. __________________________________ _____________________________ SIGNATURE DATE Cut to remove and mail, fax or email to Gatco Manufacturing Inc. to register. VT-00-M1...
- Page 4 VT-00-M1...
- Page 5 The manufacturer has designed the equipment to be used with all its safety equipment properly attached to minimize the chance of accidents. BEFORE YOU START!! Read the safety messages shown in this manual. Observe the rules of safety and common sense! VT-00-M1...
-
Page 6: Table Of Contents
Table of Contents Introduction ................................7 Safety ..................................7 General Safety ................................ 8 Tools Required ................................9 Vent-A-Lid Placement ............................. 9 Install Instructions ..............................9 Operation .................................. 10 Maintenance ................................10 Warranty ................................... 11 VT-00-M1... -
Page 7: Introduction
1.0 Introduction Congratulations. We are confident that your new Gatco Vent-A-Lid will help you get the most out of your GrainAir Tube without the fuss of grain bin lid management. Before using this equipment, please read this manual and all safety information and familiarize yourself with the various features of the equipment and its safe operation. -
Page 8: General Safety
• Wear appropriate protective gear. This list includes, but is not limited to: o a hard hat o gloves o protective shoes with slip-resistant soles o protective goggles o hearing protection o fall protection if required by local regulations VT-00-M1... -
Page 9: Tools Required
2. Use reciprocating jig saw to remove circle. 3. Apply silicone around base of vent lid and replace base, install self-drilling screws to fasten base to bin lid. 4. Install lid and align holes. Install 4 self-drilling screws (note: do not overtighten screws). VT-00-M1... -
Page 10: Operation
1. If equipped, once aeration fan(s) are shut off, close bin lid fully. The Vent-A-Lid will allow any heat/moisture that the Gatco Grain Air Tube is releasing to exit the bin quickly. No bin lid management required. -
Page 11: Warranty
7. Warranty claims must be submitted to Gatco Head Office for approval before any repair and/or replacement is begun. 8. It is the responsibility of the customer, and at the customer’s cost, to transport equipment to a Gatco authorized dealer for repair and/or replacement. - Page 12 Gatco Manufacturing Inc. Physical Location: 2524 South Service Road West (south red building) Mailing Address: Box 515, Swift Current, SK, Canada, S9H 3W3 Phone: 1-306-778-3338 Fax: 1-306-778-2022 Email: sales@gatcomfg.com Website: www.gatcomfg.com VT-00-M1...
Need help?
Do you have a question about the VT-00-M1 and is the answer not in the manual?
Questions and answers