Download Print this page

Philips 588 User Manual page 10

Hide thumbs Also See for 588:

Advertisement

BABT CE Certification Application
Πηιλιπσ588.βοοκ Παγε 9 Φριδαψ, Μαρχη 17, 2006 5:04 ΠΜ
%JCTIKPI VJG DCVVGT[
Your phone comes with a standard and/or ultra-slim
battery (depending on the country of purchase). The
phone will emit an audible alert when the battery
reaches low. When the battery is completely flat, the
charging icon will appear after a few minutes of
charging.
We recommend that you do not remove the battery
when the phone is switched on as you may lose all your
personal settings as a result . If you do remove it, the
date and time settings are only memorized for a short
while. As such, you need to reset the information after
you have installed the battery back again.
)GVVKPI 5VCTVGF
1. Once the battery and back cover is attached to the
phone, plug the charger connector (supplied with
the phone, in the box) into the charging socket at
the base of the phone (arrow side up), and plug
the other end of the charger to an easily accessible
AC power socket.
2. The battery icon indicates the state of
charge: When charging, the 4 charge
indicator bars change constantly and it
normally takes around 2.5* hours to fully
recharge the battery (when charging with
the phone switched off, the screen will
display a charging animation).
3. When all 4 bars are steady, the battery is
fully charged and you can disconnect the
charger. Depending on the network and
usage conditions, the maximum talk time of
a fully-charged standard battery goes from 2
to 4 hrs*, while the maximum stand-by time
is about 240 hrs*.
*The data was derived from a test conducted at our
France laboratory when the battery is fully-charged
for the first time. Depending on the network
conditions, user settings, method of use, etc the actual
results may differ.
4.1_Special Instructions


Advertisement

loading