Sprint Pixi 3 9007T User Manual page 80

Wi-Fi Settings Menu
The Wi-Fi settings menu lets you turn Wi-Fi on or off, set up and connect to available Wi-Fi networks,
and configure advanced Wi-Fi options.
For more information about Wi-Fi settings, see Wi-Fi.
1 From Home screen, tap Apps
2 Tap Wi-Fi.
● The Wi-Fi settings menu appears.
3 Tap the Wi-Fi slider to turn Wi-Fi on
● Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.
● To disable Wi-Fi, tap the slider again
4 Tap a Wi-Fi network, enter the password, and tap Connect.
● Your tablet is connected to the selected Wi-Fi network.
5 Configure your Wi-Fi settings.
● Your Wi-Fi settings changes are saved.
● The password, for a household wireless LAN router, is sometimes found on a sticker on the
router (WEP, WPA, KEY, etc.). Contact the router manufacturer for information. For password
for a public wireless LAN, check with user's service provider.
●
Entering a password is not required if an access point is not security protected.
Advanced Wi-Fi Settings
The advanced Wi-Fi settings menu lets you set up and manage wireless access points.
● Enable Notification when Open Networks Are Available: From Wi-Fi settings, tap Menu
> Advanced > Network notification.
■
The setting is available when Wi-Fi is turned on.
■
Tap Network notification to turn the option on or off.
● Scanning always available: From Wi-Fi settings, tap Menu
always available
■
The setting is available when Wi-Fi is turned on.
■
Tap Scanning always available to turn the option on or off.
● Set Timing for Pausing a Connection: From Wi-Fi settings, tap Menu
Keep Wi-Fi on during sleep mode and then select a setting.
● Install certificates: From Wi-Fi settings, tap Menu
then select a setting.
● Wi-Fi Direct: From Wi-Fi settings, tap Menu
● WPS Push Button: From Wi-Fi settings, tap Menu
select a setting.
● WPS Pin Entry: From Wi-Fi settings, tap Menu
a setting.
● Check MAC Address: From Wi-Fi settings, tap Menu
■
MAC Address appears below "MAC Address."
● Check IP Address: From Wi-Fi settings, tap Menu
■
IP Address appears below "IP Address."
> Settings .
.
.
> Advanced > Wi-Fi Direct to select a setting.
80
> Advanced > Scanning
> Advanced > Install certificates and
> Advanced > WPS Push Button to
> Advanced > WPS Pin Entry to select
> Advanced.
> Advanced.
> Advanced >