1. Manuals
  2. Brands
  3. MARIAN Manuals
  4. Media Converter
  5. ADCON
  6. User manual

MARIAN ADCON User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ADCON
User's Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ADCON and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for MARIAN ADCON

  • Page 1 ADCON User’s Guide...
  • Page 2 Marian. All trademarks are the property of the respective owners. Marian is not liable for any damage and costs resulting from it, which are caused by improper handling or installation of the device. Technical changes are reserved.

  • Page 3: Table Of Contents

    Table of Contents Scope of Supply Ports and Operating Elements 2.1. Front Side 2.1.1. Using Microphones for Ports on the Front Side 2.2. Back Side Operation 3.1. Rack Installation 3.2. Power Supply Technical Data Service and Support...

  • Page 4: Scope Of Supply

    Dear User, thank you very much for your decision to purchase ADCON as high- quality ADAT converter. We wish you lots of success in working with our product. Please consider taking 10 minutes to study this guide. Besides traditional installation and operation instructions it contains information about synchronization and operation of ADCON that will make the handling with the device easier for you.

  • Page 5: Ports And Operating Elements

    Ports and Operating Elements 2.1. Front Side Analog Inputs “In 1” and “In 2” The analog inputs on the front side are identical to the analog inputs 1 and 2 on the back side. They are especially suitable for microphones. You can insert ¼’’ TRS plugs as well as XLR plugs into the input jacks.

  • Page 6: Using Microphones For Ports On The Front Side

    “Mode” Switch The “Mode” switch changes the operation mode of your ADCON: In the “48 kHz AD” position the ADCON works as clock master. The internal clock operates using 48 kHz. In this switch position the device exclusively converts the analog input signals into an ADAT output signal.

  • Page 7: Back Side

    Back Side Analog Inputs 1-8 Devices are connected to the analog inputs using balanced cables, which are equipped at the ADCON side with ¼’’ TRS plugs. They can also be connected using non-balanced cables with a ¼’’ TS plug. Level Switch for Analog Inputs Using this switch you can switch the input level of the analog inputs between –10 dBV and +4 dBu.

  • Page 8: Operation

    Please ensure sufficient air supply and avoid external thermal influences in order to protect the ACDON from overheat. The ADCON has a size of only 9.5”, therefore you will require an appropriate fitting kid for the installation when using the entire width of the rack.

  • Page 9: Technical Data

    Service and Support Should you have any questions or problems during the installation or operation of your ADCON please perform the following steps: Have a look in our Audio Guide, which has been published on the internet, whether you can find a solution to your problem. Please refer to the following site: www.marian.de...

Table of Contents