Related Manuals for Taco Y102B-150V
Summary of Contents for Taco Y102B-150V
- Page 1 INSTRUCTION BOOKLET Y102B-150V Vertical YAGI ANTENNA Please Note: A qualified structural engineer should be consulted prior to mounting an antenna www.tacoantenna.com on a tower or support structure. 30377002 Rev. C...
- Page 2 1-SAFETY PRECAUTIONS To protect your antenna and receiver from lightning damage, you should ground your equipment. 1. To ground the antenna attach a ground wire under the nut of the 1/4- 20 x 2¼ in. long hex head screw at the end of the crossarm see Figure 7.
- Page 3 3-ANTENNA ASSEMBLY The dipoles and elements are match marked to the supporting crossarm. The dipole insulators and parasitic elements mount to the same side of the crossarm. FIGURE 1 FIGURE 2 1. Next, starting with dipoles “C” assemble dipoles “C” and “D” to their marked locations on the crossarm as shown in Figure 2..
- Page 4 5-BRACE ASSEMBLY 3. The parasitic elements are mounted onto the crossarm at its match- marked location with 1/4-20 x 2 1/4” long hex head screws, as shown in The crossarm brace is attached to the mast side of the crossarm Figure 3.
Need help?
Do you have a question about the Y102B-150V and is the answer not in the manual?
Questions and answers