Hi-Fi Stereo Sound System - Philips VRX364AT Owner's Manual

52 Hi-Fi Stereo Sound System

Multi-Channel Television Sound System broadcasts are automati-
cally recorded in Hi-Fi stereo sound. To play in Hi-Fi stereo tapes
recorded in Hi-Fi stereo, however, you'll need to follow the steps
below.
1
Press the VCR button, then press the MENU button.
2
Press the Number 2 button to select VCR SET UP.
TO SELECT PUSH NO. SHOWN
1 REPEAT PLAY OFF
2 ON SCREEN MODE
3 AUDIO OUT
4 LANGUAGE
5 VCR PLUS+ REF. MAP
TO END PUSH EXIT
3
Press the Number 3 button to select AUDIO OUT.
TO SELECT PUSH NO. SHOWN
1 HIFI ON
2 MONO
TO END PUSH EXIT
4
Press the Number 1 button to select HIFI. ON will appear to
the right of HIFI on-screen.
TO SELECT PUSH NO. SHOWN
1 HIFI ON
2 MONO
TO END PUSH EXIT
5
Press the STATUS/EXIT button to exit.
POWER EJECT
SLOW
PAUSE/STILL
PLAY
– REW F.FWD
STOP
5
STATUS/EXIT CLEAR
MENU
SPEED MEMORY
JOG&
REC/OTR
SHUTTLE
1
VCR TV CBL/DSS
4
1 2 3
4 5 6
2
7 8 9
0 +100
VCR PLUS+
/ENTER
TIME
VAR. SLOW
VCR/TV
SEARCH
Helpful Hints
• All programs are automatically
recorded in both Hi-Fi stereo sound
and in monaural sound.
• The audio level of a tape recorded
in Hi-Fi stereo will differ from the
audio level of a tape not recorded
in Hi-Fi stereo.
• Normally, HIFI should be selected
from the AUDIO OUT menu for
playback with Hi-Fi sound. But, you
can change the selection to MONO
if you want monaural audio play-
back. To do this, follow steps 1 - 3
above. At step 4, press the Number
2 button to select MONO. Press
the STATUS/EXIT button to exit.
HIFI will disappear from the status
display.
• If you play non-Hi-Fi tapes while the
VCR is set to HIFI, HIFI will disap-
pear from the status display and the
tape will play in monaural sound.
See page 55 for more hints.
+
MUTE 3
VOLUME
CHANNEL