Setting The Remote To Operate A Tv 21 - Philips VRA670AT Owner's Manual

Your VCR remote control may operate your TV. If the remote
control doesn't operate your TV now, follow the steps below.
1
Point the remote control at your TV and press the TV
button. Then, press the POWER button. If your TV turns
on or off, try the other TV buttons (see pages 23-25). If your TV
doesn't turn on or off, or if the other buttons don't work, go to
step 2.
2
Find the brand of your TV on the list below, and remem-
ber the two-digit number beside it.
EMERSON . . . . . . . . . . . . . .14
FISHER . . . . . . . . . . . . . . . . .11
GE . . . . . . . . . . . . . . . . . . . .10
GOLDSTAR . . . . . . . . . . . . .04
HITACHI . . . . . . . . . . . . . . . .12
JVC . . . . . . . . . . . . . . . . . . . .05
MAGNAVOX . . . . . . .01, 02, 03
MARANTZ . . . . . . . . . . . . . .13
MITSUBISHI . . . . . . . . . . . . .13
MONTGOMERY WARD . . . .14
PANASONIC . . . . . . . . . . . . .07
PANASONIC-GAOO . . . . . . .07
3
Press the MUTE button.
4
Within 30 seconds, press the TV button.
5
Within 30 seconds, press the Number buttons to enter
the two-digit code for your TV brand. For example, if you
have a Zenith TV, press Number buttons 0, 6.
6
Repeat step 1. If the remote control works your TV, you're fin-
ished. If the remote control still doesn't work your TV, repeat
steps 3-5, using a different code for your brand (if available).
There is no guarantee that the
remote will work your TV.

Setting the Remote to Operate a TV 21

TV CODES
PHILCO . . . . . . . . . . . . . . . .14
PHILIPS . . . . . . . . . . . . . . . .01
PHILIPS MAGNAVOX. .01, 02, 03
QUASAR . . . . . . . . . . . . . . . .07
RCA . . . . . . . . . . . . . . . . . . .10
SAMSUNG . . . . . . . . . . . . . .17
SANYO . . . . . . . . . . . . . . . . .11
SEARS . . . . . . . . . . . . . .08, 11
SHARP . . . . . . . . . . . . . . . . .16
SONY . . . . . . . . . . . . . . . . . .09
TOSHIBA . . . . . . . . . . . . . . .08
ZENITH . . . . . . . . . . . . . .06, 15
1&6 2
POWER
VCR/TV SPEED
REC/OTR
PLAY
REW
STOP
STATUS/EXIT
1 2 3
4 5 6
7 8 9
3
0
ALT.CH
MUTE
VCR TV CBL/DBS
VCR PLUS+
/ENTER
VAR.SLOW
TRACKING F.ADV
QUICK TIME INDEX REC END
SEARCH
1&6
Helpful Hints
• The remote control may only operate
some features of your TV. For exam-
ple, the remote control may turn on
the TV power, but it may not change
channels at the TV.
• If you can not change the channels
at the TV using the Number but-
tons, press the VCR PLUS+/ENTER
button after you press the Number
buttons. It may change channels at
the TV.
• When you replace the batteries in
the remote control, you must pro-
gram the remote control again.
• Remember to point the remote con-
trol toward the TV during steps 1-6.
Find your
TV code.
EJECT
MEMORY
PAUSE/STILL
F.FWD
CH.
5
VOL.
4
SLOW
X2 PLAY
SKIP