Table of Contents
Advertisement
Switch the camera recorder to 'still picture' (playback-
pause).
Confirm with the menu button
now controls the connected camera recorder type.
The following message appears on the TV screen:
'VCR CONTROL DETECTED' when the video recorder
controls the camera recorder or 'CAMERA CONTROL
DETECTED' when the camera recorder controls the video
recorder.
Starting synchro-edit
Switch on the TV set. If required, select the programme
number for the video recorder.
Press the
button. The main menu appears.
MENU
Select the line 'RECORD FUNCTIONS' with the menu
buttons
or
P =
P ;
Select the line 'SYNCHRO EDIT' with the menu buttons
or
and confirm with the
P =
P ;
The OSD corresponding to the connected camera re-
corder type appears on the TV screen.
Search the beginning of the recording on the video
recorder.
Press the
STILL R
button. 'STILL' appears on the TV
screen.
Use the
button to select the OSD for the camera
SELECT
recorder.
Search the beginning of the recording on the camera
recorder.
Switch the camera recorder to 'still picture' (playback-
Pause).
The way copying is started depends on the camera recorder
type used:
Variant 1 when the video recorder controls the camera
recorder, or
Variant 2 when the camera recorder controls the video
recorder.
20
P
. The video recorder
and confirm with the
button.
P
button.
P
Variant 1, the video recorder is to control
the camera recorder
Start copying with the
recorder.
The camera recorder starts 'PLAYBACK' and at the same
time the video recorder starts 'RECORDING'.
Stop copying with the
corder.
End copying with the
Variant 2, the camera recorder is to control
the video recorder
Start copying with the corresponding button on the
camera recorder.
The camera recorder starts 'PLAYBACK' and at the same
time the video recorder starts 'RECORDING'.
Stop copying with the PAUSE or STILL button on the
camera recorder.
End copying with the
Setting the 'preroll time'
When the beginning of the recording is missing, the 'preroll
time' was too long. Select a shorter 'preroll time'.
If recording started too early, the 'preroll time' was too short.
Select a longer 'preroll time'. You can select a 'preroll time'
between 1:00 and 5:00 seconds.
Press the
button.
MENU
Select the line 'RECORD FUNCTIONS' with the menu
buttons
P =
or
P ;
.
P
Select the line 'RECORD SETTINGS' with the menu
buttons
or
P =
P ;
.
P
In line 'PREROLL TIME', adjust the 'preroll time' with the
menu buttons
P
or
D You can also directly enter the 'preroll time' with the digit
buttons
.
0-9
D With the
button you can reset the 'preroll time'
CLEAR (CL)
to that of the identified camera recorder type.
Confirm with the
OK
To end, press the
MENU
RECORD/OTR n
button on the video
button on the video re-
STOP h
button.
MENU
button.
MENU
and confirm with the menu button
and confirm with the menu button
Q
.
buton.
button.
Advertisement
Table of Contents
