One Click IntelliPlug AVC014 User Manual page 19

OPERATING THE INTELLIPLUG WITH THE REMOTE SENSOR
SECTIONS
Table of Contents
LED Indicator Lights - Infra Red Mode
The Mode LED will glow GREEN when the One Click
IntelliPlug is receiving power from the mains.
The Slave LED will glow RED if the Remote Sensor has
not been connected.
Once the Remote Sensor is connected and power is
switched to peripheral equipment, the LED will glow
GREEN.
During the shutdown process, the LED will flash GREEN
for approximately 5 minutes before power is shut down.
Dual Mode IntelliPlug AVC014
1 2 3
If there are no LEDs illuminating on the unit, ensure the unit
is connected properly to the mains power point and the mains
power switch is turned on at the wall.
If the wall socket is set to ON, then disconnect the One Click
IntelliPlug from the wall socket and then plug it back in.
Try connecting the One Click IntelliPlug on another wall socket.
Failing that, navigate to our support pages on how to obtain
a replacement unit
4 5
17