Memory Function - Mercedes-Benz SL Operator's Manual

You can position the front-passenger side exte-
rior mirror in such a way that you can see the
rear wheel on that side as soon as you engage
reverse gear. This setting can be stored using
memory button M ?.
Make sure that the SmartKey is in position 2
X
in the ignition lock.
With the exterior mirror on the front-
X
passenger side activated, use adjustment
button = to adjust the exterior mirror. In the
exterior mirror, the rear wheel and the curb
should be visible.
Press memory button M ? and one of the
X
arrows on adjustment button = within three
seconds.
The parking position is stored if the exterior
mirror does not move.
If the mirror moves out of position, repeat the
X
steps.
Calling up a stored parking position set-
ting
Turn the SmartKey to position 2 in the ignition
X
lock.
Adjust the exterior mirror on the front-
X
passenger side using button ;.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger side
moves back to its original position:
as soon as you exceed a speed of 9 mph
R
(15 km/h)
if you press button : for the exterior mirror
R
on the driver's side

Memory function

Memory function
Storing settings
G
WARNING
If you use the memory function on the driver's
side while driving, you could lose control of
the vehicle as a result of the adjustments
being made. There is a risk of an accident.
Only use the memory function on the driver's
side when the vehicle is stationary.
G
WARNING
When the memory function adjusts the seat or
steering wheel, you and other vehicle occu-
pants – particularly children – could become
trapped. There is a risk of injury.
While the memory function is making adjust-
ments, make sure that no one has any body
parts in the sweep of the seat or steering
wheel. If somebody becomes trapped, imme-
diately release the memory function position
button. The adjustment process is stopped.
G
WARNING
Children could become trapped if they acti-
vate the memory function, particularly when
unattended. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
The memory function can be used at any time,
e.g. even when the SmartKey isn't in the ignition
lock.
With the memory function, you can store up to
three different settings, e.g. for three different
people.
The following settings are stored as a single
memory preset:
position of the seat, backrest and head
R
restraint
driver's side: steering wheel position
R
driver's side: position of the exterior mirrors
R
on the driver's and front-passenger sides
103
Z