1. Manuals
  2. Brands
  3. eBridge Manuals
  4. Adapter
  5. eBridge8E
  6. Installation manual

eBridge eBridge8E Installation Manual

Eoc receiver with integral poe switch
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
Ethernet over Coax Solutions

Installation Guide

Models Include:
eBridge8E
- Eight (8) Port EoC Receiver with Integral PoE Switch (25Mbps)
eBridge800E
- Eight (8) Port EoC Receiver with Integral PoE Switch (100Mbps)
I.T.E. 43KC
Rev. 092716
More than just power.™

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the eBridge8E and is the answer not in the manual?

Questions and answers

Summary of Contents for eBridge eBridge8E

  • Page 1: Installation Guide

    Ethernet over Coax Solutions Installation Guide Models Include: eBridge8E - Eight (8) Port EoC Receiver with Integral PoE Switch (25Mbps) eBridge800E - Eight (8) Port EoC Receiver with Integral PoE Switch (100Mbps) I.T.E. 43KC More than just power.™ Rev. 092716...

  • Page 2: Installation Instructions

    Overview: The eBridge8E/eBridge800E is an all-in-one head-end solution for upgrading coax to IP that combines a PoE+ switch and multi-port EoC (Ethernet over Coax) receiver into a single integrated unit for upgrading existing coax infrastructure and deploying the latest IP devices. This 8-Port Managed EoC Receiver with Integral PoE+ switch provides 30W full power per port (240W total).

  • Page 3: Technical Specifications

    Appropriate consideration of equipment nameplate rating should be used when addressing this concern. 1. Attach mounting brackets to eBridge unit for rack or wall mount installation (Figs. 4 & 5, pg. 8). Affix rubber pads to the unit for shelf installation (Fig. 6, pg. 8).
  • Page 4 Fig. 2 eBridge8E/800E Switch Front of eBridge8E/800E eBridge800E uses both 1Gb ports Rear of eBridge8E/800E + BAT – AC POWER eBridge800E eBridge8E (100Mbps) (25Mbps) Coax - Data & PoE+ up to 300m Coax - Data & PoE+ up to 500m...

  • Page 5: Factory Default Settings

    Enter the default values here. Click on the button labeled Log In. 4. The status page of the eBridge8E/eBridge800E will appear. Click on the tab labeled Network Settings. This will open the Network Setting screen. In this screen the MAC Address of the eBridge8E/eBridge800E module will be found along with the Network Settings and Email Settings.
  • Page 6 Heartbeat Timer: The heartbeat timer will send a trap message indicating that the eBridge8E/eBridge800E is still connected and communicating. Setting the Heartbeat Timer: 1. Click the button labeled Heartbeat Timer Setting. 2. Select the desired time between heartbeat messaging in the Days, Hours, Minutes and Seconds in corresponding fields.
  • Page 7 Rack Mount Chassis Mechanical Drawing and Dimensions: 1.625” x 19.125” x 8.5” (42mm x 486mm x 216mm) Fig. 3 19.125" 486mm 0.75" 19.05mm 17.625" 447.7mm 8.5" 216mm 1.625" + BAT – 42mm AC POWER www.altronix.com - 7 - eBridge8E / eBridge800E...

  • Page 8: Rack Mount Installation

    Altronix is not responsible for any typographical errors. 140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056 website: www.altronix.com | e-mail: info@altronix.com | Lifetime Warranty | Made in U.S.A. MEMBER II eBridge8E / eBridge800E H11Q www.altronix.com - 8 -...

This manual is also suitable for:

Ebridge800e

Table of Contents