Advertisement
True to the Music
LX8
User Guide
Eight Channel • Transformer Isolated • Line Splitter
Radial Engineering Ltd.
1588 Kebet Way, Port Coquitlam BC V3C 5M5
tel: 604-942-1001 • fax: 604-942-1010
email: info@radialeng.com • web: www.radialeng.com
www.radialeng.com
Specifications and appearance are subject to change without notice.
© Copyright 2017, all rights reserved.
Advertisement
Table of Contents
Related Manuals for Radial Engineering LX8
Summary of Contents for Radial Engineering LX8
- Page 1 True to the Music User Guide Eight Channel • Transformer Isolated • Line Splitter Radial Engineering Ltd. 1588 Kebet Way, Port Coquitlam BC V3C 5M5 tel: 604-942-1001 • fax: 604-942-1010 email: info@radialeng.com • web: www.radialeng.com www.radialeng.com Specifications and appearance are subject to change without notice.
-
Page 3: Table Of Contents
LX8 DESIGN CONCEPT The Radial LX8 is an eight channel, balanced line splitter in a compact 1RU package that divides the signals three ways; to a direct output; a direct output with ground lift; and an isolated output. A high performance Jensen™ bridging transformer is used on the iso- lated output to eliminate hum and buzz caused by ground loops. -
Page 4: Signal Flow
Ground Lift Isolated Output Parallel Inputs Isolated Output For flexibility, the LX8 has three paralleled inputs. The ISOLATED outputs uses eight precision Jensen audio • Female XLR connectors on the front panel isolation transformers to decouple the signals from the DI- •... -
Page 5: Features
12. Direct Output - This output passes signal through the manufactured with plated through holes and secured LX8 and is wired parallel to the DB-25 and Euroblocks with 8 standoffs. Transformers - Each transformer is mounted directly on terminals. -
Page 6: Connecting The Lx8
LX8 using the front panel XLR inputs, or the rear panel DB-25 and Euroblocks terminals. Which input you choose to use will depend where the LX8 is located and what you are connecting to it. For instance, individual channels may be con-... -
Page 7: Applications
All connectors are 100% isolated from the steel chassis allowing chassis and signal ground to be kept separate. However, a single internal switch is provided to connect the pin-1 cable shields to the chassis without modifying the LX8. By default, this switch is factory set to open or “lifted”... - Page 8 RADIAL ENGINEERING LTD. 3 YEAR TRANSFERABLE WARRANTY RADIAL ENGINEERING LTD. (“Radial”) warrants this product to be free from defects in material and workmanship and will remedy any such defects free of charge according to the terms of this warranty. Radial will repair or replace (at its option) any defective component(s) of this product (excluding finish and wear and tear on components under normal use) for a period of three (3) years from the original date of purchase.
Need help?
Do you have a question about the LX8 and is the answer not in the manual?
Questions and answers